Lines Matching refs:xhci_dbg
639 xhci_dbg(xhci, "%s: stopping usb%d port polling.\n",
801 xhci_dbg(xhci, "config port %d-%d wake bits, portsc: 0x%x, write: 0x%x\n",
874 xhci_dbg(xhci, "%s: stopping usb%d port polling.\n",
1052 xhci_dbg(xhci, "Stop HCD\n");
1060 xhci_dbg(xhci, "// Disabling event ring interrupts\n");
1065 xhci_dbg(xhci, "cleaning up memory\n");
1068 xhci_dbg(xhci, "xhci_stop completed - status = %x\n",
1075 xhci_dbg(xhci, "Initialize the xhci_hcd\n");
1081 xhci_dbg(xhci, "Start the primary HCD\n");
1084 xhci_dbg(xhci, "Start the secondary HCD\n");
1153 xhci_dbg(xhci, "%s: starting usb%d port polling.\n",
1268 xhci_dbg(hcd_to_xhci(hcd),
1390 xhci_dbg(xhci, "xHCI %s called with unaddressed device\n",
1397 xhci_dbg(xhci, "xHCI %s called with udev and "
1518 xhci_dbg(xhci, "Can't queue urb, port error, link inactive\n");
1560 xhci_dbg(xhci, "Ep 0x%x: URB %p submitted for non-responsive xHCI host.\n",
1789 xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
1792 xhci_dbg(xhci, "xHCI %s - can't drop slot or ep 0 %#x\n",
1831 xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",
1882 xhci_dbg(xhci, "xHCI %s - can't add slot or ep 0 %#x\n",
1945 xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",
2900 xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
2992 xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
3051 xhci_dbg(xhci, "endpoint disable with ep_state 0x%x\n",
3149 xhci_dbg(xhci, "%s: Failed to queue stop ep command, %d ",
3180 xhci_dbg(xhci, "%s: Failed to queue config ep command, %d ",
3254 xhci_dbg(xhci, "xHCI HW only supports %u stream ctx entries.\n",
3283 xhci_dbg(xhci, "Ep 0x%x only supports %u stream IDs.\n",
3377 xhci_dbg(xhci, "Driver wants %u stream IDs (including stream 0).\n",
3383 xhci_dbg(xhci, "xHCI controller does not support streams.\n");
3433 xhci_dbg(xhci, "Need %u stream ctx entries for %u stream IDs.\n",
3484 xhci_dbg(xhci, "Slot %u ep ctx %u now has streams.\n",
3672 xhci_dbg(xhci, "The device to be reset with slot ID %u does "
3689 xhci_dbg(xhci, "The device to be reset with slot ID %u does "
3707 xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id);
3716 xhci_dbg(xhci, "Couldn't allocate command structure.\n");
3725 xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
3748 xhci_dbg(xhci, "Can't reset device (slot ID %u) in %s state\n",
3751 xhci_dbg(xhci, "Not freeing device rings.\n");
3756 xhci_dbg(xhci, "Successful reset device command.\n");
3942 xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
4060 xhci_dbg(xhci, "Slot already in default state\n");
4390 xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n",
5009 xhci_dbg(xhci, "Could not allocate xHCI TT structure.\n");
5030 xhci_dbg(xhci, "xHCI version %x needs hub "
5048 xhci_dbg(xhci, "xHCI version %x doesn't need hub "
5055 xhci_dbg(xhci, "Set up %s for hub device.\n",
5198 xhci_dbg(xhci, "Resetting HCD\n");
5203 xhci_dbg(xhci, "Reset complete\n");
5219 xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
5229 xhci_dbg(xhci, "Enabling 32-bit DMA addresses.\n");
5233 xhci_dbg(xhci, "Calling HCD init\n");
5238 xhci_dbg(xhci, "Called HCD init\n");