Lines Matching refs:xhci_dbg
590 xhci_dbg(xhci, "Ignoring request to disable SuperSpeed port.\n");
595 xhci_dbg(xhci,
607 xhci_dbg(xhci, "disable port %d-%d, portsc: 0x%x\n",
658 xhci_dbg(xhci, "clear port%d %s change, portsc: 0x%x\n",
686 xhci_dbg(xhci, "set port power %d-%d %s, portsc: 0x%x\n",
732 xhci_dbg(xhci, "Disable all slots\n");
746 xhci_dbg(xhci, "Disable all port (PP = 0)\n");
754 xhci_dbg(xhci, "Stop controller\n");
762 xhci_dbg(xhci, "Enter Test Mode: %d, Port_id=%d\n",
799 xhci_dbg(xhci, "Set port %d-%d link state, portsc: 0x%x, write 0x%x",
970 xhci_dbg(xhci, "resume USB2 port %d-%d\n",
992 xhci_dbg(xhci, "slot_id is zero\n");
1236 xhci_dbg(xhci, "Wrong hub descriptor type for "
1271 xhci_dbg(xhci, "Get port status %d-%d read: 0x%x, return 0x%x",
1359 xhci_dbg(xhci, "Disable port %d-%d\n",
1376 xhci_dbg(xhci, "Enable port %d-%d\n",
1399 xhci_dbg(xhci, "CTC flag is 0, port already supports entering compliance mode\n");
1408 xhci_dbg(xhci, "Enable compliance mode transition for port %d-%d\n",
1457 xhci_dbg(xhci, "missing U0 port change event for port %d-%d\n",
1503 xhci_dbg(xhci, "set port reset, actual port %d-%d status = 0x%x\n",
1509 xhci_dbg(xhci, "set port remote wake mask, actual port %d-%d status = 0x%x\n",
1567 xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n");
1568 xhci_dbg(xhci, "PORTSC %04x\n", temp);
1590 xhci_dbg(xhci, "slot_id is zero\n");
1705 xhci_dbg(xhci, "%s: stopping usb%d port polling\n",
1738 xhci_dbg(xhci, "usb%d bus suspend to fail because a port is resuming\n",
1766 xhci_dbg(xhci, "port %d-%d polling in bus suspend, waiting\n",
1774 xhci_dbg(xhci, "Bus suspend bailout, port over-current detected\n");
1782 xhci_dbg(xhci, "Bus suspend bailout, port connect change\n");
1785 xhci_dbg(xhci, "port %d-%d not suspended\n",
1920 xhci_dbg(xhci, "reset stuck port %d-%d\n",