Lines Matching defs:set
36 * @mode: the mode to set (J, K SE0 NAK, Force Enable)
114 /* set no action before sending new link state change */
117 /* set requested state */
305 * GUSB2PHYCFG.SUSPHY is set, it must be cleared before issuing an
465 * is to set the ClearPendIN bit when issuing a Clear Stall EP
536 * completion, it will set Transfer Resource for all available endpoints.
661 * must be set to 0 when operating in fullspeed. Internally the
692 * The max packet size is set to 1024, as the txfifo requirements mainly apply
1053 * set. Do not clear DEP flags, so that the end transfer command will
1228 * @use_bounce_buffer: set to use bounce buffer
1229 * @must_interrupt: set to interrupt on TRB completion
1344 /* All TRBs setup for MST must set CSP=1 when LST=0 */
1369 * controller to observe the HWO bit set prematurely.
1480 * next SG entry. If not, set interrupt on this TRB to
1489 /* Check if previous requests already set IOC */
1711 * @force: set forcerm bit in the command
1714 * When setting force, the ForceRM bit will be set. In that case
1899 * frame_number is set from XferNotReady and may be already
2026 /* If req->trb is not set, then the request has not started */
2188 dev_err(dwc->dev, "failed to set STALL on %s\n",
2305 static void dwc3_gadget_enable_linksts_evts(struct dwc3 *dwc, bool set)
2313 if (set)
2469 static int dwc3_gadget_set_remote_wakeup(struct usb_gadget *g, int set)
2475 dwc->wakeup_configured = !!set;
3011 * compatibility with the Windows' usb stack, let's set the
3494 * The event status only reflects the status of the TRB with IOC set.
3495 * For the requests that don't set interrupt on completion, the driver
3923 * CMDIOC bit set and delay kicking transfer until the
3936 * case, if the IOC bit is not set, then delay by 1ms
3995 * interrupt to set dwc->connected to FALSE.
4032 * flag. Such flag gets set whenever we have a SETUP_PENDING
4103 * wants to set this to a different value, we need to add a
4176 * DCFG.LPMCap is set, core responses with an ACK and the
4626 * elsewhere in this driver) which tells us we can't set max speed to