Lines Matching defs:print_param
661 #define print_param(_seq, _ptr, _param) \
673 print_param(seq, p, otg_caps.hnp_support);
674 print_param(seq, p, otg_caps.srp_support);
675 print_param(seq, p, otg_caps.otg_rev);
676 print_param(seq, p, dma_desc_enable);
677 print_param(seq, p, dma_desc_fs_enable);
678 print_param(seq, p, speed);
679 print_param(seq, p, enable_dynamic_fifo);
680 print_param(seq, p, en_multiple_tx_fifo);
681 print_param(seq, p, host_rx_fifo_size);
682 print_param(seq, p, host_nperio_tx_fifo_size);
683 print_param(seq, p, host_perio_tx_fifo_size);
684 print_param(seq, p, max_transfer_size);
685 print_param(seq, p, max_packet_count);
686 print_param(seq, p, host_channels);
687 print_param(seq, p, phy_type);
688 print_param(seq, p, phy_utmi_width);
689 print_param(seq, p, phy_ulpi_ddr);
690 print_param(seq, p, phy_ulpi_ext_vbus);
691 print_param(seq, p, i2c_enable);
692 print_param(seq, p, ipg_isoc_en);
693 print_param(seq, p, ulpi_fs_ls);
694 print_param(seq, p, host_support_fs_ls_low_power);
695 print_param(seq, p, host_ls_low_power_phy_clk);
696 print_param(seq, p, activate_stm_fs_transceiver);
697 print_param(seq, p, activate_stm_id_vb_detection);
698 print_param(seq, p, ts_dline);
699 print_param(seq, p, reload_ctl);
701 print_param(seq, p, uframe_sched);
702 print_param(seq, p, external_id_pin_ctl);
703 print_param(seq, p, power_down);
704 print_param(seq, p, lpm);
705 print_param(seq, p, lpm_clock_gating);
706 print_param(seq, p, besl);
707 print_param(seq, p, hird_threshold_en);
708 print_param(seq, p, hird_threshold);
709 print_param(seq, p, service_interval);
710 print_param(seq, p, host_dma);
711 print_param(seq, p, g_dma);
712 print_param(seq, p, g_dma_desc);
713 print_param(seq, p, g_rx_fifo_size);
714 print_param(seq, p, g_np_tx_fifo_size);
732 print_param(seq, hw, op_mode);
733 print_param(seq, hw, arch);
734 print_param(seq, hw, dma_desc_enable);
735 print_param(seq, hw, enable_dynamic_fifo);
736 print_param(seq, hw, en_multiple_tx_fifo);
737 print_param(seq, hw, rx_fifo_size);
738 print_param(seq, hw, host_nperio_tx_fifo_size);
739 print_param(seq, hw, dev_nperio_tx_fifo_size);
740 print_param(seq, hw, host_perio_tx_fifo_size);
741 print_param(seq, hw, nperio_tx_q_depth);
742 print_param(seq, hw, host_perio_tx_q_depth);
743 print_param(seq, hw, dev_token_q_depth);
744 print_param(seq, hw, max_transfer_size);
745 print_param(seq, hw, max_packet_count);
746 print_param(seq, hw, host_channels);
747 print_param(seq, hw, hs_phy_type);
748 print_param(seq, hw, fs_phy_type);
749 print_param(seq, hw, i2c_enable);
750 print_param(seq, hw, num_dev_ep);
751 print_param(seq, hw, num_dev_perio_in_ep);
752 print_param(seq, hw, total_fifo_size);
753 print_param(seq, hw, power_optimized);
754 print_param(seq, hw, utmi_phy_data_width);