Lines Matching refs:serial_outp
160 #define serial_outp(up, offset, value) serial_out(up, offset, value)
200 serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);
220 serial_outp(up, UART_RSA_FRR, 0);
243 serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);
403 serial_outp(up, UART_TX, up->port.x_char);
621 serial_outp(up, UART_LCR, 0xBF);
622 serial_outp(up, UART_EFR, UART_EFR_ECB);
623 serial_outp(up, UART_IER, 0);
624 serial_outp(up, UART_LCR, 0);
626 serial_outp(up, UART_LCR, 0xBF);
627 serial_outp(up, UART_EFR, UART_EFR_ECB);
628 serial_outp(up, UART_LCR, 0);
644 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
645 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
647 serial_outp(up, UART_FCR, 0);
684 serial_outp(up, UART_LCR, UART_LCR_WLEN8);
699 serial_outp(up, UART_IER, up->ier);
732 serial_outp(up, UART_IER, 0);
749 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
752 serial_outp(up, UART_FCR, 0);
874 serial_outp(up, UART_LCR, 0xBF);
875 serial_outp(up, UART_EFR, cflag & CRTSCTS ? UART_EFR_CTS :0);
877 serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
878 serial_outp(up, UART_DLL, quot & 0xff); /* LS of divisor */
879 serial_outp(up, UART_DLM, quot >> 8); /* MS of divisor */
881 serial_outp(up, UART_FCR, fcr); /* set fcr */
882 serial_outp(up, UART_LCR, cval); /* reset DLAB */
887 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
889 serial_outp(up, UART_FCR, fcr); /* set fcr */
1054 serial_outp(up, UART_IER, 0);
1059 serial_outp(up, UART_IER, 0x0f);
1064 serial_outp(up, UART_IER, scratch);
1082 serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A);
1084 serial_outp(up, UART_MCR, save_mcr);
1088 serial_outp(up, UART_LCR, 0xBF); /* set up for StarTech test */
1089 serial_outp(up, UART_EFR, 0); /* EFR is the same as FCR */
1090 serial_outp(up, UART_LCR, 0);
1091 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1109 serial_outp(up, UART_LCR, UART_LCR_DLAB);
1113 serial_outp(up, UART_LCR, 0xBF);
1120 serial_outp(up, UART_LCR, save_lcr | UART_LCR_DLAB);
1121 serial_outp(up, UART_FCR,
1131 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1132 serial_outp(up, UART_LCR, 0);
1133 serial_outp(up, UART_FCR,
1139 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1141 serial_outp(up, UART_LCR, save_lcr);
1144 serial_outp(up, UART_SCR, 0xa5);
1146 serial_outp(up, UART_SCR, 0x5a);
1148 serial_outp(up, UART_SCR, scratch);
1165 serial_outp(up, UART_RSA_FRR, 0);
1167 serial_outp(up, UART_MCR, save_mcr);
1168 serial_outp(up, UART_FCR, (UART_FCR_ENABLE_FIFO |
1171 serial_outp(up, UART_FCR, 0);
1173 serial_outp(up, UART_IER, 0);