Lines Matching defs:mode
100 * Return a string for SCSI BUS mode.
102 static char *sym_scsi_bus_mode(int mode)
104 switch(mode) {
118 * to settle and report actual BUS mode in STEST4.
187 * properly set IRQ mode, prior to resetting the bus.
338 * to set divide by 3.5 mode in my 53c810 ...
635 * Set SCSI BUS mode.
636 * - LVD capable chips (895/895A/896/1010) report the current BUS mode
753 * If chip is a C1010, guess the sync limits in DT mode.
783 * In dual channel mode, contention occurs if internal cycles
848 * Get parity checking, host ID and verbose mode from NVRAM
884 * Set irq mode.
1375 /* Some targets fail to properly negotiate DT in SE mode */
1755 udelay(2000); /* The 895 needs time for the bus mode to settle */
1766 OUTB(np, nc_dmode , np->rv_dmode); /* Burst length, dma mode */
1856 * For 895/6 enable SBMC interrupt and save current SCSI bus mode.
1874 * Prepare sync negotiation according to actual SCSI bus mode.
1929 * Switch trans mode for current job and its target.
2246 * chip exception handler for SCSI bus mode change
2248 * spi2-r12 11.2.3 says a transceiver mode change must
2251 * device that detects a mode change shall set data transfer
2252 * mode to eight bit asynchronous, etc...
2263 printf("%s: SCSI BUS mode change from %s to %s.\n", sym_name(np),