Lines Matching refs:ql4_printk
334 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: IPv4 Ping src: %pI4 "
351 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: LinkLocal Ping "
359 ql4_printk(KERN_WARNING, ha, "%s: iface num = %d "
373 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: IPv6 "
380 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: IPv6 "
651 ql4_printk(KERN_ERR, ha, "No memory for chap_flash_data\n");
670 ql4_printk(KERN_ERR, ha, "No memory for ha->chap_list\n");
688 ql4_printk(KERN_ERR, ha, "CHAP table cache is empty!\n");
699 ql4_printk(KERN_ERR, ha, "Invalid Chap index\n");
739 ql4_printk(KERN_ERR, ha, "CHAP table cache is empty!\n");
782 ql4_printk(KERN_INFO, ha, "%s: num_entries = %d, CHAP idx = %d\n",
822 ql4_printk(KERN_INFO, ha, "%s: Valid CHAP Entries = %d\n",
893 ql4_printk(KERN_INFO, ha, "CHAP entry %d is in use, cannot "
918 DEBUG2(ql4_printk(KERN_INFO, ha, "Chap Cookie: x%x\n",
922 ql4_printk(KERN_ERR, ha, "No valid chap entry found\n");
999 ql4_printk(KERN_ERR, ha,
1023 ql4_printk(KERN_INFO, ha,
1034 ql4_printk(KERN_INFO, ha,
1044 ql4_printk(KERN_INFO, ha, "CHAP entry not available\n");
1072 DEBUG2(ql4_printk(KERN_INFO, ha, "Func: %s\n", __func__));
1077 ql4_printk(KERN_INFO, ha, "%s: host_stats size mismatch expected = %d, is = %d\n",
1094 ql4_printk(KERN_ERR, ha,
1103 ql4_printk(KERN_ERR, ha,
1260 ql4_printk(KERN_INFO, ha, "%s: Get host stats done\n",
1736 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: %pI4\n", __func__,
1742 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: %pI6\n", __func__,
1745 ql4_printk(KERN_WARNING, ha, "%s: Invalid endpoint\n",
1777 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: host: %ld\n", __func__,
1794 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: host: %ld\n", __func__,
1828 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: host: %ld\n", __func__,
1835 ql4_printk(KERN_ERR, ha,
1843 ql4_printk(KERN_ERR, ha,
1973 ql4_printk(KERN_ERR, ha, "Could not create IPv4 iSCSI "
1986 ql4_printk(KERN_ERR, ha, "Could not create IPv6 iSCSI "
1996 ql4_printk(KERN_ERR, ha, "Could not create IPv6 iSCSI "
2080 ql4_printk(KERN_ERR, ha,
2097 ql4_printk(KERN_ERR, ha,
2278 ql4_printk(KERN_ERR, ha, "Unknown IPv6 param = %d\n",
2309 ql4_printk(KERN_ERR, ha, "Invalid IPv4 bootproto\n");
2536 ql4_printk(KERN_ERR, ha, "Unknown IPv4 param = %d\n",
2698 ql4_printk(KERN_ERR, ha, "Unknown iscsi param = %d\n",
2743 ql4_printk(KERN_ERR, ha, "%s: Unable to alloc init_cb\n",
2752 ql4_printk(KERN_ERR, ha, "%s: get ifcb failed\n", __func__);
2775 ql4_printk(KERN_ERR, ha,
2790 ql4_printk(KERN_ERR, ha,
2797 ql4_printk(KERN_ERR, ha,
2815 ql4_printk(KERN_ERR, ha, "%s: set flash mbx failed\n",
2823 ql4_printk(KERN_ERR, ha, "%s: disable acb mbx failed\n",
2836 ql4_printk(KERN_ERR, ha, "%s: set acb mbx failed\n",
2954 DEBUG2(ql4_printk(KERN_INFO, ha,
2963 DEBUG2(ql4_printk(KERN_INFO, ha,
2968 ql4_printk(KERN_INFO, ha,
2973 DEBUG2(ql4_printk(KERN_INFO, ha,
3053 DEBUG2(ql4_printk(KERN_INFO, ha,
3058 DEBUG2(ql4_printk(KERN_INFO, ha,
3063 DEBUG2(ql4_printk(KERN_INFO, ha,
3083 DEBUG2(ql4_printk(KERN_INFO, ha,
3108 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: host: %ld\n", __func__,
3152 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: host: %ld\n", __func__,
3158 ql4_printk(KERN_ERR, ha,
3215 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: conn_idx = %u\n", __func__,
3235 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: sid = %d, cid = %d\n", __func__,
3265 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: sid = %d, cid = %d\n", __func__,
3274 ql4_printk(KERN_INFO, ha,
3283 ql4_printk(KERN_ERR, ha,
3303 ql4_printk(KERN_ERR, ha, "%s: Failed set param for index[%d]\n",
3310 ql4_printk(KERN_ERR, ha, "%s: Login failed: %s\n", __func__,
3343 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: cid = %d\n", __func__,
3348 ql4_printk(KERN_ERR, ha, "%s: Logout failed\n", __func__);
3388 ql4_printk(KERN_ERR, ha, "Passthru failed status = 0x%x\n",
3410 ql4_printk(KERN_INFO, ha,
3425 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: MaxRecvLen %u, iscsi hrd %d\n",
3480 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: MaxRecvLen %u, iscsi hrd %d\n",
3500 ql4_printk(KERN_INFO, ha, "%s: scsi cmd xmit not implemented\n",
3922 ql4_printk(KERN_ERR, ha,
3930 DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed "
3964 ql4_printk(KERN_ERR, ha,
3972 DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed "
4246 ql4_printk(KERN_WARNING, ha,
4282 ql4_printk(KERN_WARNING, ha,
4292 ql4_printk(KERN_WARNING, ha,
4301 ql4_printk(KERN_WARNING, ha,
4330 ql4_printk(KERN_WARNING, ha, "Device temperature %d degrees C"
4336 ql4_printk(KERN_WARNING, ha, "Device temperature %d"
4341 ql4_printk(KERN_INFO, ha, "Device temperature is"
4393 ql4_printk(KERN_INFO, ha, "%s: disabling pause transmit on port 0 & 1.\n",
4400 ql4_printk(KERN_ERR, ha, "%s: Firmware aborted with error code 0x00006700. Device is being reset\n",
4406 ql4_printk(KERN_ERR, ha, "%s: Firmware error detected device is being reset\n",
4419 ql4_printk(KERN_INFO, ha, "%s: detect abort needed!\n",
4451 ql4_printk(KERN_INFO, ha, "disabling pause transmit on port 0 & 1.\n");
4461 ql4_printk(KERN_INFO, ha, "%s: HW State: NEED RESET!\n",
4468 ql4_printk(KERN_INFO, ha, "%s: Graceful reset bit is not set\n",
4482 ql4_printk(KERN_INFO, ha, "%s: HW State: NEED QUIES!\n",
4517 DEBUG2(ql4_printk(KERN_INFO, ha,
4535 DEBUG2(ql4_printk(KERN_INFO, ha,
4637 DEBUG2(ql4_printk(KERN_INFO, ha,
4826 ql4_printk(KERN_INFO, ha, "Disabling the board\n");
4865 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: adapter OFFLINE\n", __func__));
4871 ql4_printk(KERN_INFO, ha, "%s: disabling pause transmit on port 0 & 1.\n",
4894 DEBUG2(ql4_printk(KERN_INFO, ha,
4939 DEBUG2(ql4_printk(KERN_INFO, ha,
4964 ql4_printk(KERN_INFO, ha, "scsi%ld: %s: Don't retry recover adapter\n",
4992 ql4_printk(KERN_INFO, ha, "%s: don't retry "
5070 ql4_printk(KERN_INFO, ha, "scsi%ld: %s: ddb[%d]"
5097 ql4_printk(KERN_INFO, ha, "scsi%ld: %s: ddb[%d]"
5105 ql4_printk(KERN_INFO, ha, "scsi%ld: %s: ddb[%d]"
5123 ql4_printk(KERN_INFO, ha, "scsi%ld: %s: ddb[%d]"
5132 ql4_printk(KERN_INFO, ha,
5162 DEBUG2(ql4_printk(KERN_INFO, ha,
5187 DEBUG2(ql4_printk(KERN_INFO, ha,
5295 ql4_printk(KERN_WARNING, ha, "event type: 0x%x not "
5319 DEBUG2(ql4_printk(KERN_INFO, ha,
5339 ql4_printk(KERN_INFO, ha, "%s: disabling pause transmit on port 0 & 1.\n",
5349 ql4_printk(KERN_INFO, ha, "HW State: FAILED\n");
5357 ql4_printk(KERN_INFO, ha, "%s: Disabling ACB\n",
5362 ql4_printk(KERN_INFO, ha, "%s: ACB config failed\n",
5373 ql4_printk(KERN_INFO, ha, "%s: Restoring ACB\n",
5377 ql4_printk(KERN_INFO, ha, "%s: ACB config failed ",
5468 ql4_printk(KERN_ERR, ha, "%s: Error exporting ddb to sysfs\n",
5593 ql4_printk(KERN_WARNING, ha,
5598 ql4_printk(KERN_WARNING, ha, "region #0 not a PIO resource\n");
5608 ql4_printk(KERN_ERR, ha,
5615 ql4_printk(KERN_ERR, ha,
5621 ql4_printk(KERN_WARNING, ha,
5631 ql4_printk(KERN_ERR, ha,
5926 ql4_printk(KERN_INFO, ha, "%s: Get FW boot info for 0x%x func %d\n",
5946 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Adapter boot "
5966 DEBUG2(ql4_printk(KERN_ERR, ha,
5985 DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: Get Flash"
5992 DEBUG2(ql4_printk(KERN_INFO, ha, "Firmware boot options"
6010 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Primary target ID %d, Secondary"
6047 ql4_printk(KERN_ERR, ha, "Do not have CHAP table cache\n");
6090 DEBUG2(ql4_printk(KERN_ERR, ha,
6099 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: No Flash DDB found at "
6127 DEBUG2(ql4_printk(KERN_INFO, ha, "Setting chap\n"));
6134 ql4_printk(KERN_ERR, ha, "Failed to set chap\n");
6145 DEBUG2(ql4_printk(KERN_INFO, ha, "Setting BIDI chap\n"));
6152 ql4_printk(KERN_ERR, ha, "Failed to set BIDI chap\n");
6178 DEBUG2(ql4_printk(KERN_INFO, ha,
6192 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Primary boot target not "
6204 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Secondary boot target not"
6221 ql4_printk(KERN_INFO, ha,
6344 DEBUG2(ql4_printk(KERN_INFO, ha,
6353 DEBUG2(ql4_printk(KERN_INFO, ha,
6374 DEBUG2(ql4_printk(KERN_WARNING, ha,
6382 DEBUG2(ql4_printk(KERN_WARNING, ha,
6517 DEBUG2(ql4_printk(KERN_WARNING, ha,
6525 DEBUG2(ql4_printk(KERN_WARNING, ha,
6672 DEBUG2(ql4_printk(KERN_INFO, ha,
6733 ql4_printk(KERN_ERR, ha, "Out of memory\n");
6763 ql4_printk(KERN_ERR, ha, "Failed to find ST [%d] in flash\n",
6791 DEBUG2(ql4_printk(KERN_ERR, ha, "Out of memory\n"));
6821 ql4_printk(KERN_ERR, ha,
6825 ql4_printk(KERN_INFO, ha,
6954 DEBUG2(ql4_printk(KERN_ERR, ha, "Unable to get ep\n"));
6989 DEBUG2(ql4_printk(KERN_INFO, ha,
7020 DEBUG2(ql4_printk(KERN_ERR, ha, "Out of memory\n"));
7050 DEBUG2(ql4_printk(KERN_INFO, ha,
7126 DEBUG2(ql4_printk(KERN_ERR, ha, "Out of memory\n"));
7147 DEBUG2(ql4_printk(KERN_INFO, ha,
7231 ql4_printk(KERN_ERR, ha,
7240 ql4_printk(KERN_ERR, ha,
7262 ql4_printk(KERN_INFO, ha, "%s: sysfs entry %s created\n",
7265 ql4_printk(KERN_INFO, ha, "%s: sysfs entry %s created\n",
7300 DEBUG2(ql4_printk(KERN_ERR, ha, "%s: Invalid portal type\n",
7311 DEBUG2(ql4_printk(KERN_ERR, ha,
7320 ql4_printk(KERN_ERR, ha,
7378 DEBUG2(ql4_printk(KERN_ERR, ha,
7403 ql4_printk(KERN_INFO, ha,
7408 ql4_printk(KERN_ERR, ha,
7435 DEBUG2(ql4_printk(KERN_ERR, ha,
7445 DEBUG2(ql4_printk(KERN_ERR, ha,
7458 DEBUG2(ql4_printk(KERN_INFO, ha,
7493 ql4_printk(KERN_WARNING, ha,
7520 ql4_printk(KERN_ERR, ha,
7565 ql4_printk(KERN_ERR, ha,
7574 DEBUG2(ql4_printk(KERN_ERR, ha,
7632 ql4_printk(KERN_ERR, ha, "%s: Not a flash node session\n",
7639 ql4_printk(KERN_ERR, ha,
7649 ql4_printk(KERN_ERR, ha,
7757 ql4_printk(KERN_ERR, ha, "%s:Out of memory\n", __func__);
7764 ql4_printk(KERN_WARNING, ha,
7772 ql4_printk(KERN_WARNING, ha,
7779 ql4_printk(KERN_ERR, ha,
7787 ql4_printk(KERN_ERR, ha,
8316 ql4_printk(KERN_ERR, ha,
8351 DEBUG2(ql4_printk(KERN_ERR, ha,
8385 DEBUG2(ql4_printk(KERN_ERR, ha, "%s: start offset=%u, end offset=%u\n",
8390 DEBUG2(ql4_printk(KERN_ERR, ha, "%s:Invalid DDB index %u\n",
8399 DEBUG2(ql4_printk(KERN_ERR, ha,
8421 ql4_printk(KERN_INFO, ha,
8449 DEBUG2(ql4_printk(KERN_ERR, ha,
8524 DEBUG2(ql4_printk(KERN_INFO, ha,
8569 ql4_printk(KERN_ERR, ha,
8582 DEBUG2(ql4_printk(KERN_INFO, ha,
8603 DEBUG2(ql4_printk(KERN_INFO, ha,
8689 ql4_printk(KERN_INFO, ha, "Found an ISP%04x, irq %d, iobase 0x%p\n",
8712 ql4_printk(KERN_WARNING, ha,
8768 ql4_printk(KERN_WARNING, ha, "%s: don't retry "
8789 ql4_printk(KERN_WARNING, ha, "Failed to initialize adapter\n");
8811 ql4_printk(KERN_WARNING, ha, "Unable to start DPC thread!\n");
8820 ql4_printk(KERN_WARNING, ha, "Unable to start task thread!\n");
8834 ql4_printk(KERN_WARNING, ha, "Failed to reserve "
8862 ql4_printk(KERN_ERR, ha,
8920 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: "
8941 ql4_printk(KERN_ERR, ha, "%s: Logout failed\n", __func__);
8948 ql4_printk(KERN_ERR, ha,
9127 ql4_printk(KERN_WARNING, ha, "scsi%ld: Return from %s\n",
9218 ql4_printk(KERN_INFO, ha, "scsi%ld:%d:%llu: Abort command issued cmd=%p, cdb=0x%x\n",
9223 ql4_printk(KERN_INFO, ha, "PCI/Register disconnect, exiting.\n");
9231 ql4_printk(KERN_INFO, ha, "scsi%ld:%d:%llu: Specified command has already completed.\n",
9259 ql4_printk(KERN_INFO, ha,
9288 ql4_printk(KERN_INFO, ha,
9300 ql4_printk(KERN_INFO, ha, "PCI/Register disconnect, exiting.\n");
9307 ql4_printk(KERN_INFO, ha, "DEVICE RESET FAILED. %d\n", stat);
9313 ql4_printk(KERN_INFO, ha,
9324 ql4_printk(KERN_INFO, ha,
9367 ql4_printk(KERN_INFO, ha, "PCI/Register disconnect, exiting.\n");
9431 ql4_printk(KERN_INFO, ha, "PCI/Register disconnect, exiting.\n");
9455 ql4_printk(KERN_INFO, ha,
9477 ql4_printk(KERN_INFO, ha, "HOST RESET %s.\n",
9496 ql4_printk(KERN_ERR, ha, "%s: Unable to alloc acb\n",
9529 DEBUG2(ql4_printk(KERN_INFO, ha, "%s %s\n", __func__,
9541 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Don't Reset HBA\n",
9580 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: recover adapter fail\n",
9609 ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: error detected:state %x\n",
9659 ql4_printk(KERN_WARNING, ha, "scsi%ld: In %s\n", ha->host_no, __func__);
9674 ql4_printk(KERN_INFO, ha, "scsi%ld: %s: Finding PCI device at func %x\n",
9688 ql4_printk(KERN_INFO, ha, "scsi%ld: %s: Found PCI func in enabled state%x\n",
9708 ql4_printk(KERN_INFO, ha, "scsi%ld: %s: devfn being reset "
9719 ql4_printk(KERN_INFO, ha, "scsi%ld: %s: HW State: FAILED\n",
9732 ql4_printk(KERN_INFO, ha, "scsi%ld: %s: HW State: "
9741 ql4_printk(KERN_INFO, ha, "scsi%ld: %s: HW State: "
9753 ql4_printk(KERN_INFO, ha, "scsi%ld: %s: devfn 0x%x is not "
9782 ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: slot_reset\n",
9802 ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: Can't re-enable "
9818 ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: Return=%x\n"
9829 ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: pci_resume\n",
9834 ql4_printk(KERN_ERR, ha, "scsi%ld: %s: the device failed to "