Lines Matching refs:ql4_printk
371 DEBUG2(ql4_printk(KERN_INFO, ha,
470 DEBUG2(ql4_printk(KERN_INFO, ha,
495 DEBUG2(ql4_printk(KERN_INFO, ha,
614 ql4_printk(KERN_WARNING, ha,
954 ql4_printk(KERN_WARNING, ha, "%s: qla4_82xx_rom_lock failed\n",
1044 ql4_printk(KERN_WARNING, ha,
1057 ql4_printk(KERN_WARNING, ha,
1063 ql4_printk(KERN_INFO, ha,
1068 ql4_printk(KERN_WARNING, ha,
1097 DEBUG2(ql4_printk(KERN_WARNING, ha,
1128 ql4_printk(KERN_WARNING, ha,
1197 ql4_printk(KERN_ERR, ha, "%s: write to AGT_ADDR_HI failed\n",
1228 ql4_printk(KERN_ERR, ha, "%s: write to AGT_WRDATA failed\n",
1240 ql4_printk(KERN_ERR, ha, "%s: write to AGT_CTRL failed\n",
1250 ql4_printk(KERN_ERR, ha, "%s: failed to read MD_MIU_TEST_AGT_CTRL\n",
1537 ql4_printk(KERN_ERR, ha,
1596 DEBUG2(ql4_printk(KERN_INFO, ha,
1621 ql4_printk(KERN_INFO, ha, "%s(%ld): drv_active: 0x%08x\n",
1643 ql4_printk(KERN_INFO, ha, "%s(%ld): drv_active: 0x%08x\n",
1688 ql4_printk(KERN_INFO, ha, "%s(%ld): drv_state: 0x%08x\n",
1709 ql4_printk(KERN_INFO, ha, "%s(%ld): drv_state: 0x%08x\n",
1778 ql4_printk(KERN_INFO, ha,
1784 ql4_printk(KERN_INFO, ha,
1789 ql4_printk(KERN_ERR, ha, "FW: Load firmware from flash"
1826 ql4_printk(KERN_INFO, ha, "Error in processing rdmdio entry\n");
1877 ql4_printk(KERN_INFO, ha, "Error in processing mdiobus idle\n");
1915 DEBUG2(ql4_printk(KERN_INFO, ha, "Entering fn: %s\n", __func__));
2027 DEBUG2(ql4_printk(KERN_INFO, ha, "Entering fn: %s\n", __func__));
2031 DEBUG2(ql4_printk(KERN_INFO, ha,
2042 DEBUG2(ql4_printk(KERN_INFO, ha,
2080 DEBUG2(ql4_printk(KERN_INFO, ha,
2097 ql4_printk(KERN_INFO, ha,
2103 DEBUG2(ql4_printk(KERN_INFO, ha,
2109 DEBUG2(ql4_printk(KERN_INFO, ha,
2120 DEBUG2(ql4_printk(KERN_INFO, ha, "Leaving fn: %s\n", __func__));
2144 DEBUG2(ql4_printk(KERN_INFO, ha, "Entering fn: %s\n", __func__));
2201 DEBUG2(ql4_printk(KERN_INFO, ha, "Entering fn: %s\n", __func__));
2304 DEBUG2(ql4_printk(KERN_INFO, ha, "Leaving fn: %s\n", __func__));
2316 DEBUG2(ql4_printk(KERN_INFO, ha, "Entering fn: %s\n", __func__));
2322 DEBUG2(ql4_printk(KERN_INFO, ha,
2331 DEBUG2(ql4_printk(KERN_INFO, ha, "Leaving fn: %s datacount: 0x%lx\n",
2344 DEBUG2(ql4_printk(KERN_INFO, ha, "Entering fn: %s\n", __func__));
2406 DEBUG2(ql4_printk(KERN_INFO, ha, "Entering fn: %s\n", __func__));
2438 DEBUG2(ql4_printk(KERN_INFO, ha, "Entering fn: %s\n", __func__));
2443 DEBUG2(ql4_printk(KERN_INFO, ha,
2473 DEBUG2(ql4_printk(KERN_INFO, ha, "Entering fn: %s\n", __func__));
2478 DEBUG2(ql4_printk(KERN_INFO, ha,
2483 DEBUG2(ql4_printk(KERN_INFO, ha,
2490 DEBUG2(ql4_printk(KERN_INFO, ha,
2496 DEBUG2(ql4_printk(KERN_INFO, ha,
2538 DEBUG2(ql4_printk(KERN_INFO, ha, "Leaving fn: %s datacount: 0x%x\n",
2565 DEBUG2(ql4_printk(KERN_INFO, ha,
2607 ql4_printk(KERN_ERR, ha, "%s: TIMEOUT\n",
2665 ql4_printk(KERN_ERR, ha, "%s: TIMEOUT\n", __func__);
2685 ql4_printk(KERN_ERR, ha, "%s: TIMEOUT\n",
2703 ql4_printk(KERN_ERR, ha, "%s: TIMEOUT\n",
2823 ql4_printk(KERN_ERR, ha, "%s: TIMEOUT\n", __func__);
2915 ql4_printk(KERN_ERR, ha, "%s: TIMEOUT_1\n",
2937 ql4_printk(KERN_ERR, ha, "%s: TIMEOUT_2\n",
2965 DEBUG2(ql4_printk(KERN_INFO, ha, "[%s]: fl_addr: 0x%x, count: 0x%x\n",
2972 ql4_printk(KERN_ERR, ha, "%s: Flash Read Error,Count=%d\n",
3001 ql4_printk(KERN_INFO, ha, "%s(%ld) No buffer to dump\n",
3013 ql4_printk(KERN_INFO, ha, "[%s]: starting data ptr: %p\n",
3015 ql4_printk(KERN_INFO, ha,
3018 ql4_printk(KERN_INFO, ha, "[%s]: Capture Mask obtained: 0x%x\n",
3020 ql4_printk(KERN_INFO, ha, "[%s]: Total_data_size 0x%x, %d obtained\n",
3039 ql4_printk(KERN_INFO, ha,
3052 DEBUG2(ql4_printk(KERN_INFO, ha,
3190 ql4_printk(KERN_INFO, ha,
3197 DEBUG2(ql4_printk(KERN_INFO, ha, "Leaving fn: %s Last entry: 0x%x\n",
3234 ql4_printk(KERN_INFO, ha, "%s: Unable to collect minidump\n",
3274 ql4_printk(KERN_INFO, ha, "HW State: INITIALIZING\n");
3287 ql4_printk(KERN_INFO, ha, "HW State: FAILED\n");
3295 ql4_printk(KERN_INFO, ha, "HW State: READY\n");
3314 ql4_printk(KERN_INFO, ha,
3324 DEBUG2(ql4_printk(KERN_INFO, ha,
3338 ql4_printk(KERN_INFO, ha,
3344 ql4_printk(KERN_INFO, ha,
3355 ql4_printk(KERN_INFO, ha,
3372 ql4_printk(KERN_INFO, ha, "Device state is 0x%x = %s\n", dev_state,
3377 ql4_printk(KERN_INFO, ha, "HW State: COLD/RE-INIT\n");
3404 ql4_printk(KERN_INFO, ha,
3410 ql4_printk(KERN_INFO, ha,
3429 ql4_printk(KERN_INFO, ha,
3436 ql4_printk(KERN_INFO, ha,
3507 DEBUG2(ql4_printk(KERN_INFO, ha, "Device state is 0x%x = %s\n",
3518 ql4_printk(KERN_WARNING, ha,
3528 ql4_printk(KERN_INFO, ha, "Device state is 0x%x = %s\n",
3650 ql4_printk(KERN_WARNING, ha, "ROM lock failed\n");
3657 ql4_printk(KERN_WARNING, ha,
3693 DEBUG2(ql4_printk(KERN_INFO, ha, "FLTL[%s] = 0x%x.\n", loc, *start));
3727 DEBUG2(ql4_printk(KERN_INFO, ha, "Unsupported FLT detected: "
3738 DEBUG2(ql4_printk(KERN_INFO, ha, "Inconsistent FLT detected: "
3751 DEBUG3(ql4_printk(KERN_DEBUG, ha, "FLT[%02x]: start=0x%x "
3798 DEBUG2(ql4_printk(KERN_INFO, ha,
3841 DEBUG2(ql4_printk(KERN_INFO, ha, "Inconsistent FDT detected: "
3867 DEBUG2(ql4_printk(KERN_INFO, ha, "FDT[%s]: (0x%x/0x%x) erase=0x%x "
3894 DEBUG2(ql4_printk(KERN_DEBUG, ha,
3896 DEBUG2(ql4_printk(KERN_DEBUG, ha,
3997 ql4_printk(KERN_INFO, ha, "HW State: NEED RESET\n");
4002 ql4_printk(KERN_INFO, ha, "HW State: DEVICE INITIALIZING\n");
4013 ql4_printk(KERN_INFO, ha, "Clearing AF_RECOVERY in qla4_82xx_isp_reset\n");
4094 DEBUG2(ql4_printk(KERN_INFO, ha, "%s\n", __func__));
4102 DEBUG2(ql4_printk(KERN_INFO, ha,
4115 DEBUG2(ql4_printk(KERN_INFO, ha, "%s\n", __func__));
4123 DEBUG2(ql4_printk(KERN_INFO, ha,
4164 ql4_printk(KERN_WARNING, ha,
4196 ql4_printk(KERN_WARNING, ha, "%s: Skipping retry of adapter initialization as IRQs are not attached\n",