Lines Matching refs:ql4_printk
33 ql4_printk(KERN_ERR, ha, "%s: Failed to set register window : addr written 0x%x, read 0x%x!\n",
52 ql4_printk(KERN_ERR, ha, "%s: failed read of addr 0x%x!\n",
69 ql4_printk(KERN_ERR, ha, "%s: failed wrt to addr 0x%x, data 0x%x\n",
90 ql4_printk(KERN_ERR, ha, "%s: flash lock by func %d failed, held by func %d\n",
122 ql4_printk(KERN_ERR, ha, "%s: Illegal addr = 0x%x\n",
133 ql4_printk(KERN_ERR, ha, "%s: failed to write addr 0x%x to FLASH_DIRECT_WINDOW\n!",
142 ql4_printk(KERN_ERR, ha, "%s: failed to read addr 0x%x!\n",
172 ql4_printk(KERN_ERR, ha, "%s: Illegal addr = 0x%x\n",
181 ql4_printk(KERN_ERR, ha, "%s: failed to write addr 0x%x to FLASH_DIRECT_WINDOW!\n",
196 ql4_printk(KERN_ERR, ha, "%s: failed to read addr 0x%x!\n",
212 ql4_printk(KERN_ERR, ha, "%s: failed to write addr 0x%x to FLASH_DIRECT_WINDOW!\n",
226 ql4_printk(KERN_ERR, ha, "%s: failed to read addr 0x%x!\n",
244 ql4_printk(KERN_INFO, ha, "%s: Resetting rom lock\n", __func__);
279 ql4_printk(KERN_INFO, ha, "%s: IDC Lock recovery initiated for func %d\n",
341 ql4_printk(KERN_INFO, ha, "%s: Lock by func %d failed after 2s, lock held by func %d, lock count %d, first_owner %d\n",
350 ql4_printk(KERN_INFO, ha, "%s: IDC lock failed for func %d\n",
359 ql4_printk(KERN_INFO, ha, "%s: IDC lock Recovery by %d successful\n",
365 ql4_printk(KERN_INFO, ha, "%s: IDC lock Recovery by %d failed, Retrying timeout\n",
383 ql4_printk(KERN_ERR, ha, "%s: IDC Unlock by %d failed, lock owner is %d\n",
400 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: idc_ctrl = %d\n", __func__,
411 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: idc_ctrl = %d\n", __func__,
493 DEBUG2(ql4_printk(KERN_INFO, ha,
513 ql4_printk(KERN_INFO, ha, "%s: Performing ISP error recovery\n",
517 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: reset acknowledged\n",
527 ql4_printk(KERN_INFO, ha, "%s: Non Reset owner dev init timeout\n",
545 ql4_printk(KERN_INFO, ha, "%s: drv_state = 0x%x, drv_active = 0x%x\n",
550 ql4_printk(KERN_INFO, ha, "%s: %s: RESET TIMEOUT! drv_state: 0x%08x, drv_active: 0x%08x\n",
567 ql4_printk(KERN_INFO, ha, "%s: Reset_owner turning off drv_active of non-acking function 0x%x\n",
594 DEBUG2(ql4_printk(KERN_DEBUG, ha,
607 ql4_printk(KERN_ERR, ha, "%s: Error: Invalid reset_seq_template\n",
614 DEBUG2(ql4_printk(KERN_INFO, ha,
642 ql4_printk(KERN_ERR, ha, "%s: Failed to allocate memory for boot loader cache\n",
651 ql4_printk(KERN_ERR, ha, "%s: Error reading firmware from flash\n",
655 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Read firmware from flash\n",
662 ql4_printk(KERN_ERR, ha, "%s: Error writing firmware to MS\n",
667 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Wrote firmware size %d to MS\n",
685 DEBUG2(ql4_printk(KERN_INFO, ha,
737 ql4_printk(KERN_ERR, ha, "%s: Poll Failed: 0x%08x 0x%08x 0x%08x\n",
761 ql4_printk(KERN_ERR, ha, "%s: Reset seq checksum failed\n",
782 ql4_printk(KERN_ERR, ha, "%s: Failed to allocate reset template resources\n",
793 DEBUG2(ql4_printk(KERN_INFO, ha,
801 ql4_printk(KERN_ERR, ha, "%s: Failed to read reset template\n",
813 ql4_printk(KERN_ERR, ha, "%s: Template Header size %d is invalid, tmplt_hdr_def_size %d\n",
823 DEBUG2(ql4_printk(KERN_INFO, ha,
831 ql4_printk(KERN_ERR, ha, "%s: Failed to read reset template\n",
838 ql4_printk(KERN_ERR, ha, "%s: Reset Seq checksum failed!\n",
842 DEBUG2(ql4_printk(KERN_INFO, ha,
1006 DEBUG2(ql4_printk(KERN_INFO, ha,
1065 DEBUG2(ql4_printk(KERN_INFO, ha,
1094 DEBUG2(ql4_printk(KERN_INFO, ha,
1098 ql4_printk(KERN_ERR, ha, "%s: Reset sequence completed with some timeout errors.\n",
1160 ql4_printk(KERN_ERR, ha, "%s: Unknown command ==> 0x%04x on entry = %d\n",
1178 ql4_printk(KERN_ERR, ha, "%s: Abrupt STOP Sub-Sequence end.\n",
1187 ql4_printk(KERN_ERR, ha, "%s: Abrupt START Sub-Sequence end.\n",
1196 ql4_printk(KERN_ERR, ha, "%s: Abrupt INIT Sub-Sequence end.\n",
1216 ql4_printk(KERN_INFO, ha, "%s: Graceful RESET: Not collecting minidump\n",
1225 ql4_printk(KERN_ERR, ha, "%s: Copy bootloader, firmware restart failed!\n",
1244 ql4_printk(KERN_ERR, ha, "%s: Restart error\n", __func__);
1247 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Restart done\n",
1253 ql4_printk(KERN_ERR, ha, "%s: Peg not initialized\n",
1361 ql4_printk(KERN_ERR, ha, "%s: Reset recovery disabled\n",
1367 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: HW State: NEED RESET\n",
1379 DEBUG2(ql4_printk(KERN_INFO, ha,
1410 DEBUG2(ql4_printk(KERN_INFO, ha, "SRE-Shim Ctrl:0x%x\n", val));
1413 DEBUG2(ql4_printk(KERN_INFO, ha,
1424 DEBUG2(ql4_printk(KERN_INFO, ha,
1435 DEBUG2(ql4_printk(KERN_INFO, ha,
1446 DEBUG2(ql4_printk(KERN_INFO, ha,
1457 DEBUG2(ql4_printk(KERN_INFO, ha,
1471 DEBUG2(ql4_printk(KERN_INFO, ha,
1487 DEBUG2(ql4_printk(KERN_INFO, ha,
1527 ql4_printk(KERN_INFO, ha, "Disabled pause frames successfully.\n");
1553 ql4_printk(KERN_INFO, ha, "EPORT is out of reset.\n");
1578 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: drv_active = 0x%X\n",