Lines Matching refs:OUTB
4435 OUTB (nc_istat, SIGP);
4459 OUTB (nc_stest3, TE);
4460 OUTB (nc_scntl1, CRST);
4494 OUTB (nc_scntl1, 0);
4585 OUTB (nc_dien , 0);
4595 OUTB(nc_dmode, np->sv_dmode);
4596 OUTB(nc_dcntl, np->sv_dcntl);
4597 OUTB(nc_ctest0, np->sv_ctest0);
4598 OUTB(nc_ctest3, np->sv_ctest3);
4599 OUTB(nc_ctest4, np->sv_ctest4);
4600 OUTB(nc_ctest5, np->sv_ctest5);
4601 OUTB(nc_gpcntl, np->sv_gpcntl);
4602 OUTB(nc_stest2, np->sv_stest2);
5035 OUTB (nc_istat, SRST);
5037 OUTB (nc_istat, 0 );
5040 OUTB (nc_ctest0, EHP);
5042 OUTB (nc_ctest4, MUX);
5064 OUTB (nc_istat, SRST);
5068 OUTB (nc_stest3, TE|CSF);
5126 OUTB (nc_scntl0, np->rv_scntl0 | 0xc0);
5128 OUTB (nc_scntl1, 0x00); /* odd parity, and remove CRST!! */
5132 OUTB (nc_scid , RRE|np->myaddr); /* Adapter SCSI address */
5134 OUTB (nc_istat , SIGP ); /* Signal Process */
5135 OUTB (nc_dmode , np->rv_dmode); /* Burst length, dma mode */
5136 OUTB (nc_ctest5, np->rv_ctest5); /* Large fifo + large burst */
5138 OUTB (nc_dcntl , NOCOM|np->rv_dcntl); /* Protect SFBR */
5139 OUTB (nc_ctest0, np->rv_ctest0); /* 720: CDIS and EHP */
5140 OUTB (nc_ctest3, np->rv_ctest3); /* Write and invalidate */
5141 OUTB (nc_ctest4, np->rv_ctest4); /* Master parity checking */
5143 OUTB (nc_stest2, EXT|np->rv_stest2); /* Extended Sreq/Sack filtering */
5144 OUTB (nc_stest3, TE); /* TolerANT enable */
5145 OUTB (nc_stime0, 0x0c ); /* HTH disabled STO 0.25 sec */
5166 OUTB (nc_dien , MDPE|BF|ABRT|SSI|SIR|IID);
5332 OUTB (nc_sxfer, tp->sval);
5334 OUTB (nc_scntl3, tp->wval);
5743 OUTB (nc_istat, (istat & SIGP) | INTF);
5753 OUTB (nc_istat, CABRT);
5865 OUTB (nc_stest3, TE|CSF);
5882 OUTB (HS_PRT, HS_UNEXPECTED);
6043 OUTB (nc_stest3, TE|CSF); /* clear scsi fifo */
6135 OUTB (nc_stest3, TE|CSF); /* clear scsi fifo */
6660 OUTB (HS_PRT, HS_BUSY);
6755 OUTB (HS_PRT, HS_BUSY);
6842 OUTB (HS_PRT, HS_BUSY);
7649 OUTB(nc_scntl3, scntl3);
7656 OUTB(nc_stest1, DBLEN); /* Enable clock multiplier */
7665 OUTB(nc_stest3, HSC); /* Halt the scsi clock */
7666 OUTB(nc_scntl3, scntl3);
7667 OUTB(nc_stest1, (DBLEN|DBLSEL));/* Select clock multiplier */
7668 OUTB(nc_stest3, 0x00); /* Restart scsi clock */
7695 OUTB (nc_stest1, 0); /* make sure clock doubler is OFF */
7698 OUTB (nc_dien , 0); /* mask all dma interrupts */
7700 OUTB (nc_scntl3, 4); /* set pre-scaler to divide by 3 */
7701 OUTB (nc_stime1, 0); /* disable general purpose timer */
7702 OUTB (nc_stime1, gen); /* set to nominal delay of 1<<gen * 125us */
7707 OUTB (nc_stime1, 0); /* disable general purpose timer */
7713 OUTB (nc_scntl3, 0);
8169 * OUTB OUTW OUTL macros can be used safely.