Lines Matching refs:ioc_info
421 ioc_info(ioc,
609 ioc_info(ioc, "%s: req_boot_device(0x%016llx)\n",
623 ioc_info(ioc, "%s: req_alt_boot_device(0x%016llx)\n",
637 ioc_info(ioc, "%s: current_boot_device(0x%016llx)\n",
907 ioc_info(ioc, "enclosure logical id(0x%016llx), slot(%d)\n",
911 ioc_info(ioc, "enclosure level(0x%04x), connector name( %s)\n",
915 ioc_info(ioc, "chassis slot(0x%04x)\n",
936 ioc_info(ioc, "removing handle(0x%04x), sas_addr(0x%016llx)\n",
1027 ioc_info(ioc, "%s: handle(0x%04x), sas_addr(0x%016llx)\n",
1079 ioc_info(ioc, "%s: handle(0x%04x), sas_addr(0x%016llx)\n",
1257 ioc_info(ioc, "removing handle(0x%04x), wwid(0x%016llx)\n",
1260 ioc_info(ioc, "removing enclosure logical id(0x%016llx), slot(%d)\n",
1264 ioc_info(ioc, "removing enclosure level(0x%04x), connector name( %s)\n",
1347 ioc_info(ioc, "%s: handle (0x%04x), wwid(0x%016llx)\n",
1352 ioc_info(ioc, "%s: enclosure logical id(0x%016llx), slot( %d)\n",
1358 ioc_info(ioc, "%s: enclosure level(0x%04x), connector name( %s)\n",
1398 ioc_info(ioc, "%s: handle (0x%04x), wwid(0x%016llx)\n",
1403 ioc_info(ioc, "%s: enclosure logical id(0x%016llx), slot( %d)\n",
1409 ioc_info(ioc, "%s: enclosure level(0x%04x), connector name( %s)\n",
1514 ioc_info(ioc, "%s: handle(0x%04x), wwid(0x%016llx)\n",
3006 ioc_info(ioc,
3060 ioc_info(ioc, "%s: tm_cmd busy!!!\n", __func__);
3066 ioc_info(ioc, "%s: host reset in progress!\n", __func__);
3072 dhsprintk(ioc, ioc_info(ioc, "unexpected doorbell active!\n"));
3097 ioc_info(ioc, "sending tm: handle(0x%04x), task_type(0x%02x), smid(%d), timeout(%d), tr_method(0x%x)\n",
3135 ioc_info(ioc, "complete tm: ioc_status(0x%04x), loginfo(0x%08x), term_count(0x%08x)\n",
3165 ioc_info(ioc, "Task abort tm failed: handle(0x%04x),"
3533 ioc_info(ioc, "attempting host reset! scmd(0x%p)\n", scmd);
3537 ioc_info(ioc, "Blocking the host reset\n");
3545 ioc_info(ioc, "host reset: %s scmd(0x%p)\n",
4092 ioc_info(ioc, "%s: host in pci error recovery: handle(0x%04x)\n",
4099 ioc_info(ioc, "%s: host is not operational: handle(0x%04x)\n",
4140 ioc_info(ioc, "setting delete flag: handle(0x%04x), sas_addr(0x%016llx)\n",
4145 ioc_info(ioc, "setting delete flag:enclosure logical id(0x%016llx), slot(%d)\n",
4150 ioc_info(ioc, "setting delete flag: enclosure level(0x%04x), connector name( %s)\n",
4156 ioc_info(ioc, "setting delete flag: logical id(0x%016llx), slot(%d)\n",
4161 ioc_info(ioc, "setting delete flag:, enclosure level(0x%04x), connector name( %s)\n",
4178 ioc_info(ioc, "DELAYED:tr:handle(0x%04x), (open)\n",
4184 ioc_info(ioc, "tr_send:handle(0x%04x), (open), smid(%d), cb(%d)\n",
4234 ioc_info(ioc, "%s: host in pci error recovery\n",
4241 ioc_info(ioc, "%s: host is not operational\n",
4262 ioc_info(ioc, "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), loginfo(0x%08x), completed(%d)\n",
4276 ioc_info(ioc, "DELAYED:sc:handle(0x%04x), (open)\n",
4282 ioc_info(ioc, "sc_send:handle(0x%04x), (open), smid(%d), cb(%d)\n",
4353 ioc_info(ioc, "sc_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), loginfo(0x%08x)\n",
4388 ioc_info(ioc, "%s: host reset in progress!\n",
4402 ioc_info(ioc, "DELAYED:tr:handle(0x%04x), (open)\n",
4408 ioc_info(ioc, "tr_send:handle(0x%04x), (open), smid(%d), cb(%d)\n",
4440 ioc_info(ioc, "%s: host reset in progress!\n",
4461 ioc_info(ioc, "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), loginfo(0x%08x), completed(%d)\n",
4495 ioc_info(ioc, "EVENT ACK: event(0x%04x), smid(%d), cb(%d)\n",
4527 ioc_info(ioc, "%s: host has been removed\n",
4532 ioc_info(ioc, "%s: host in pci error recovery\n",
4539 ioc_info(ioc, "%s: host is not operational\n",
4553 ioc_info(ioc, "sc_send:handle(0x%04x), (open), smid(%d), cb(%d)\n",
4716 ioc_info(ioc, "setting ignoring flag\n"));
4788 ioc_info(ioc, "setting ignoring flag for switch event\n"));
4818 ioc_info(ioc, "setting delete flag: handle(0x%04x), wwid(0x%016llx)\n",
4922 ioc_info(ioc, "DELAYED:tr:handle(0x%04x), (open)\n",
5034 dtmprintk(ioc, ioc_info(ioc, "completing %d cmds\n", count));
5470 ioc_info(ioc, "\twwid(0x%016llx), port(%d)\n",
5473 ioc_info(ioc, "\tenclosure logical id(0x%016llx), slot(%d)\n",
5477 ioc_info(ioc, "\tenclosure level(0x%04x), connector name( %s)\n",
5554 ioc_info(ioc, "enclosure_processor: ioc_status (0x%04x), loginfo(0x%08x)\n",
5593 ioc_info(ioc, "enclosure_processor: ioc_status (0x%04x), loginfo(0x%08x)\n",
6074 ioc_info(ioc,
6368 drsprintk(ioc, ioc_info(ioc,
6399 drsprintk(ioc, ioc_info(ioc,
6423 drsprintk(ioc, ioc_info(ioc,
6450 drsprintk(ioc, ioc_info(ioc, "New Port table\n"));
6452 drsprintk(ioc, ioc_info(ioc,
6460 drsprintk(ioc, ioc_info(ioc, "Old Port table\n"));
6463 drsprintk(ioc, ioc_info(ioc,
6474 drsprintk(ioc, ioc_info(ioc,
6549 ioc_info(ioc,
6579 ioc_info(ioc, "updating handles for sas_host(0x%016llx)\n",
6609 ioc_info(ioc,
6817 ioc_info(ioc,
6855 ioc_info(ioc, "host_add: handle(0x%04x), sas_addr(0x%016llx), phys(%d)\n",
6973 ioc_info(ioc, "expander_add: handle(0x%04x), parent(0x%04x), sas_addr(0x%016llx), phys(%d)\n",
7366 ioc_info(ioc, "Enclosure handle(0x%04x) doesn't match with enclosure device!\n",
7429 ioc_info(ioc,
7461 ioc_info(ioc, "%s: enter: handle(0x%04x), sas_addr(0x%016llx)\n",
7483 ioc_info(ioc, "removing handle(0x%04x), sas_addr(0x%016llx)\n",
7489 ioc_info(ioc, "%s: exit: handle(0x%04x), sas_addr(0x%016llx)\n",
7531 ioc_info(ioc, "sas topology change: (%s)\n", status_str);
7609 dewtprintk(ioc, ioc_info(ioc, "ignoring expander event\n"));
7641 ioc_info(ioc, "ignoring expander event\n"));
7765 ioc_info(ioc, "device status change: (%s)\thandle(0x%04x), sas address(0x%016llx), tag(%d)",
7822 ioc_info(ioc,
7861 ioc_info(ioc,
7918 ioc_info(ioc, "NVMe discovery error(%s): wwid(0x%016llx), handle(0x%04x)\n",
7936 ioc_info(ioc, "%s: enter: handle(0x%04x), wwid(0x%016llx)\n",
7941 ioc_info(ioc, "%s: enter: enclosure logical id(0x%016llx), slot(%d)\n",
7947 ioc_info(ioc, "%s: enter: enclosure level(0x%04x), connector name(%s)\n",
7959 ioc_info(ioc, "removing handle(0x%04x), wwid(0x%016llx)\n",
7962 ioc_info(ioc, "removing : enclosure logical id(0x%016llx), slot(%d)\n",
7966 ioc_info(ioc, "removing: enclosure level(0x%04x), connector name( %s)\n",
7974 ioc_info(ioc, "%s: exit: handle(0x%04x), wwid(0x%016llx)\n",
7979 ioc_info(ioc, "%s: exit: enclosure logical id(0x%016llx), slot(%d)\n",
7985 ioc_info(ioc, "%s: exit: enclosure level(0x%04x), connector name( %s)\n",
8059 ioc_info(ioc, "device is not present handle(0x%04x), flags!!!\n",
8278 ioc_info(ioc, "pcie topology change: (%s)\n", status_str);
8351 dewtprintk(ioc, ioc_info(ioc, "ignoring switch event\n"));
8359 ioc_info(ioc, "ignoring switch event\n"));
8405 ioc_info(ioc, "handle(0x%04x) device not found: convert event to a device add\n",
8489 ioc_info(ioc, "PCIE device status change: (%s)\n"
8575 ioc_info(ioc, "enclosure status change: (%s)\n"
8618 ioc_info(ioc, "failure at %s:%d/%s()!\n",
8677 ioc_info(ioc, "%s: enter: phy number(%d), width(%d)\n",
8688 dewtprintk(ioc, ioc_info(ioc, "%s: giving up\n", __func__));
8692 ioc_info(ioc, "%s: %d retry\n",
8761 ioc_info(ioc, "%s: ABORT_TASK: giving up\n",
8792 ioc_info(ioc,
8804 ioc_info(ioc, "%s - exit, query_count = %d termination_count = %d\n",
8827 ioc_info(ioc, "discovery event: (%s)",
8895 ioc_info(ioc, "pcie enumeration event: (%s) Flag 0x%02x",
8953 ioc_info(ioc, "IR RAID_ACTION: turning fast path on for handle(0x%04x), phys_disk_num (0x%02x)\n",
8979 ioc_info(ioc, "IR RAID_ACTION: failed: ioc_status(0x%04x), loginfo(0x%08x)!!!\n",
8984 ioc_info(ioc, "IR RAID_ACTION: completed successfully\n"));
9087 ioc_info(ioc, "removing handle(0x%04x), wwid(0x%016llx)\n",
9271 ioc_info(ioc, "raid config change: (%s), elements(%d)\n",
9431 ioc_info(ioc, "%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n",
9514 ioc_info(ioc, "%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n",
9603 ioc_info(ioc, "raid operational status: (%s)\thandle(0x%04x), percent complete(%d)\n",
9678 ioc_info(ioc, "Update devices with firmware reported queue depth\n");
9725 ioc_info(ioc, "Enclosure handle(0x%04x) doesn't match with enclosure device!\n",
9859 ioc_info(ioc, "search for end-devices: start\n");
9880 ioc_info(ioc, "search for end-devices: complete\n");
9975 ioc_info(ioc, "search for end-devices: start\n");
9987 ioc_info(ioc, "\tbreak from %s: ioc_status(0x%04x), loginfo(0x%08x)\n",
9999 ioc_info(ioc, "search for PCIe end-devices: complete\n");
10080 ioc_info(ioc, "search for raid volumes: start\n");
10123 ioc_info(ioc, "search for responding raid volumes: complete\n");
10200 ioc_info(ioc, "search for expanders: start\n");
10226 ioc_info(ioc, "search for expanders: complete\n");
10244 ioc_info(ioc, "removing unresponding devices: start\n");
10247 ioc_info(ioc, "removing unresponding devices: end-devices\n");
10282 ioc_info(ioc, "Removing unresponding devices: pcie end-devices\n");
10312 ioc_info(ioc, "removing unresponding devices: volumes\n");
10324 ioc_info(ioc, "removing unresponding devices: expanders\n");
10340 ioc_info(ioc, "removing unresponding devices: complete\n");
10405 ioc_info(ioc, "scan devices: start\n");
10409 ioc_info(ioc, "\tscan devices: expanders start\n");
10418 ioc_info(ioc, "\tbreak from expander scan: ioc_status(0x%04x), loginfo(0x%08x)\n",
10433 ioc_info(ioc, "\tBEFORE adding expander: handle (0x%04x), sas_addr(0x%016llx)\n",
10437 ioc_info(ioc, "\tAFTER adding expander: handle (0x%04x), sas_addr(0x%016llx)\n",
10443 ioc_info(ioc, "\tscan devices: expanders complete\n");
10448 ioc_info(ioc, "\tscan devices: phys disk start\n");
10458 ioc_info(ioc, "\tbreak from phys disk scan: ioc_status(0x%04x), loginfo(0x%08x)\n",
10476 ioc_info(ioc, "\tbreak from phys disk scan ioc_status(0x%04x), loginfo(0x%08x)\n",
10483 ioc_info(ioc, "\tBEFORE adding phys disk: handle (0x%04x), sas_addr(0x%016llx)\n",
10501 ioc_info(ioc, "\tAFTER adding phys disk: handle (0x%04x), sas_addr(0x%016llx)\n",
10507 ioc_info(ioc, "\tscan devices: phys disk complete\n");
10509 ioc_info(ioc, "\tscan devices: volumes start\n");
10518 ioc_info(ioc, "\tbreak from volume scan: ioc_status(0x%04x), loginfo(0x%08x)\n",
10536 ioc_info(ioc, "\tbreak from volume scan: ioc_status(0x%04x), loginfo(0x%08x)\n",
10546 ioc_info(ioc, "\tBEFORE adding volume: handle (0x%04x)\n",
10549 ioc_info(ioc, "\tAFTER adding volume: handle (0x%04x)\n",
10554 ioc_info(ioc, "\tscan devices: volumes complete\n");
10558 ioc_info(ioc, "\tscan devices: end devices start\n");
10568 ioc_info(ioc, "\tbreak from end device scan: ioc_status(0x%04x), loginfo(0x%08x)\n",
10586 ioc_info(ioc, "\tBEFORE adding end device: handle (0x%04x), sas_addr(0x%016llx)\n",
10601 ioc_info(ioc, "\tAFTER adding end device: handle (0x%04x), sas_addr(0x%016llx)\n",
10606 ioc_info(ioc, "\tscan devices: end devices complete\n");
10607 ioc_info(ioc, "\tscan devices: pcie end devices start\n");
10617 ioc_info(ioc, "\tbreak from pcie end device scan: ioc_status(0x%04x), loginfo(0x%08x)\n",
10635 ioc_info(ioc, "\tAFTER adding pcie end device: handle (0x%04x), wwid(0x%016llx)\n",
10642 ioc_info(ioc, "\tpcie devices: pcie end devices complete\n");
10643 ioc_info(ioc, "scan devices: complete\n");
10654 dtmprintk(ioc, ioc_info(ioc, "%s: MPT3_IOC_PRE_RESET\n", __func__));
10668 ioc_info(ioc, "%s: clear outstanding scsi & tm cmds\n", __func__));
10696 dtmprintk(ioc, ioc_info(ioc, "%s: MPT3_IOC_DONE_RESET\n", __func__));
10774 ioc_info(ioc, "port enable: complete from worker thread\n"));
11076 ioc_info(ioc,
11135 ioc_info(ioc,
11148 ioc_info(ioc, "Io Unit Control shutdown (complete):"
11204 ioc_info(ioc, "IR shutdown (sending)\n");
11217 ioc_info(ioc, "IR shutdown (complete): ioc_status(0x%04x), loginfo(0x%08x)\n",
11311 ioc_info(ioc, "removing handle(0x%04x), wwid(0x%016llx)\n",
11786 ioc_info(ioc, "port enable: FAILED\n");
11832 ioc_info(ioc, "port enable: FAILED with timeout (timeout=300s)\n");
11856 ioc_info(ioc,
11862 ioc_info(ioc, "port enable: FAILED with (ioc_status=0x%08x)\n",
11870 ioc_info(ioc, "port enable: SUCCESS\n");
12299 ioc_info(ioc, "The max_sectors value is set to %d\n",
12313 ioc_info(ioc, "The max_sectors value is set to %d\n",
12426 ioc_info(ioc, "pdev=0x%p, slot=%s, entering operating state\n",
12452 ioc_info(ioc, "pdev=0x%p, slot=%s, previous operating state [D%d]\n",
12459 ioc_info(ioc, "Issuing Hard Reset as part of OS Resume\n");
12484 ioc_info(ioc, "PCI error: detected callback, state(%d)!!\n", state);
12525 ioc_info(ioc, "PCI error: slot reset callback!!\n");
12534 ioc_info(ioc, "Issuing Hard Reset as part of PCI Slot Reset\n");
12563 ioc_info(ioc, "PCI error: resume callback!!\n");
12582 ioc_info(ioc, "PCI error: mmio enabled callback!!\n");