Lines Matching refs:data
231 * This function is used for copying data between driver memory
456 * insert barrier for instruction interlock : data from the hardware
460 * after our return, to copy data before the valid bit check above
461 * was done. As such, some of the copied data was stale. The barrier
462 * ensures the check is before any data is copied.
697 * insert barrier for instruction interlock : data from the hardware
1430 * Clean all volatile data fields, preserve iotag and node struct.
1457 * Clean all volatile data fields, preserve iotag and node struct.
1497 * Clean all volatile data fields, preserve iotag and node struct.
1957 /* WQEs are reused. Clear stale data and set key fields to zero */
3199 * lpfc_nvme_unsol_ls_handler - Process an unsolicited event data buffer
3201 * @phba: pointer to lpfc hba data structure.
3415 /* unsol data len */
3796 * of DMAing payload, so don't free data
4027 * Fetch an entry off the ring and copy it into a local data
4420 * a free iocb from the list, copy the response data into the
5790 * data structure.
5860 * lpfc_sli4_read_rev - Issue READ_REV and collect vpd data
5861 * @phba: pointer to lpfc hba data structure.
5863 * @vpd: pointer to the memory to hold resulting port vpd data.
5865 * On output, the number of data bytes in @vpd.
5868 * addition, this routine gets the port vpd data.
5888 * Get a DMA buffer for the vpd data resulting from the READ_REV
5938 * @phba: pointer to lpfc hba data structure.
6025 * @phba: pointer to lpfc hba data structure.
6133 * @phba: pointer to lpfc hba data structure.
6455 * to the response data. The port does not guarantee to respond to
6965 * @phba: pointer to lpfc hba data structure.
7011 * @phba: pointer to lpfc hba data structure.
7527 * to the response data. The port does not guarantee to respond to
7559 * @phba: pointer to lpfc hba data structure.
7710 * @phba: pointer to lpfc hba data structure.
7754 snprintf(mbox->u.mqe.un.set_host_data.un.data,
7963 * @phba: pointer to lpfc hba data structure.
8075 * In cases of old data overflow, we do a best effort of FIFO order.
8090 /* Best effort of FIFO saved data */
8101 * @buf: Pointer to char buffer that will contain rx monitor info data
8146 /* Read out this entry's data. */
8164 /* Append entry's data to buffer */
8569 * Evaluate the read rev and vpd data. Populate the driver
8582 /* Save information as VPD data */
8792 /* Update the fc_host data structures with new wwn. */
9222 * mailbox commands, async events, els commands, receive queue data
9314 * function gets the hbalock to protect the data structures.
9547 /* Copy the mailbox extension data */
9553 /* Copy command data to host SLIM area */
9561 /* Copy the mailbox extension data */
9568 /* copy command data into host mbox for cmpl */
9572 /* First copy mbox command data to HBA SLIM, skip past first
9655 /* First copy command data */
9672 /* First copy command data */
9687 /* Copy the mailbox extension data */
9694 /* First copy command data */
9697 /* Copy the mailbox extension data */
9950 * Initialize the bootstrap memory region to avoid stale data areas
11511 temp_event_data.data = (uint32_t) icmd->ulpContext;
11880 * port data structures.
11920 /* Set the lpfc data pending flag */
11945 /* Set the lpfc data pending flag */
12026 /* Set the lpfc data pending flag */
12041 /* Set the lpfc data pending flag */
12084 * This function is used for copying data between driver memory
12114 * This function is used for copying data between a data structure
12190 * list. After HBA DMA data to these buffers, CMD_IOCB_RET_XRI64_CX
12525 * @phba: pointer to lpfc HBA data structure.
13614 * any lock held. It gets the hbalock to access and update SLI data
13929 * It gets the hbalock to access and update SLI data structures.
14018 * and update SLI data structures.
14125 * @phba: pointer to lpfc hba data structure.
14318 /* Move mbox data to caller's mailbox region, do endian swapping */
14494 "0387 NO IOCBQ data: txq_cnt=%d iocb_cnt=%d "
15533 * It gets the hbalock to access and update SLI data structures. Note that,
15540 * held. It gets the hbalock to access and update SLI data structures.
15634 * without any lock held. It gets the hbalock to access and update SLI data
17117 * @drq: The queue structure to use to create the data receive queue.
17301 /* now create the data queue */
17394 /* link the header and data RQs onto the parent cq child list */
17407 * @drqp: The queue structure array to use to create the data receive queues.
17982 * @phba: pointer to lpfc hba data structure.
18018 * @phba: pointer to lpfc hba data structure.
18034 * @phba: pointer to lpfc hba data structure.
18076 * @phba: pointer to lpfc hba data structure.
18182 * @phba: pointer to lpfc hba data structure.
18297 * @phba: pointer to lpfc hba data structure.
18427 * @fc_hdr: A pointer to the FC Header data (In Big Endian Format)
18445 case FC_RCTL_DD_SOL_DATA: /* solicited data */
18448 case FC_RCTL_DD_UNSOL_DATA: /* unsolicited data */
18449 case FC_RCTL_DD_DATA_DESC: /* data descriptor */
18466 case FC_RCTL_F_BSY: /* fabric busy to data frame */
18512 * @fc_hdr: A pointer to the FC Header data (In Big Endian Format)
18531 * @fc_hdr: A pointer to the FC Header data (In Big Endian Format)
18672 * @dmabuf: pointer to a dmabuf that describes the hdr and data of the FC frame
18869 "3154 BLS ABORT RSP failed, data: x%x/x%x\n",
19526 * @phba: pointer to lpfc hba data structure.
19586 * @phba: pointer to lpfc hba data structure.
19664 * @phba: pointer to lpfc hba data structure.
19750 * @phba: pointer to lpfc hba data structure.
19779 * @phba: pointer to lpfc hba data structure.
19795 * @phba: pointer to lpfc hba data structure.
19810 * @ndlp: pointer to lpfc nodelist data structure.
19812 * @arg: data to load as MBox 'caller buffer information'
19905 * @phba: pointer to lpfc hba data structure.
19937 * @phba: pointer to lpfc hba data structure.
19993 * Copy the fcf_index and the FCF Record Data. The data starts after
19994 * the FCoE header plus word10. The data copy needs to be endian
20016 * @phba: pointer to lpfc hba data structure.
20017 * @fcf_record: pointer to the fcf record to write the default data.
20056 * @phba: pointer to lpfc hba data structure.
20119 * @phba: pointer to lpfc hba data structure.
20165 * @phba: pointer to lpfc hba data structure.
20304 * @phba: pointer to lpfc hba data structure.
20375 * @phba: pointer to lpfc hba data structure.
20408 * @phba: pointer to lpfc hba data structure.
20446 * @phba: pointer to lpfc hba data structure.
20505 * @phba: pointer to lpfc hba data structure.
20552 * @phba: pointer to lpfc hba data structure.
20576 * lpfc_sli_get_config_region23 - Get sli3 port region 23 data.
20577 * @phba: pointer to lpfc hba data structure.
20578 * @rgn23_data: pointer to configure region 23 data.
20580 * This function gets SLI3 port configure region 23 data through memory dump
20581 * mailbox command. When it successfully retrieves data, the size of the data
20635 * lpfc_sli4_get_config_region23 - Get sli4 port region 23 data.
20636 * @phba: pointer to lpfc hba data structure.
20637 * @rgn23_data: pointer to configure region 23 data.
20639 * This function gets SLI4 port configure region 23 data through memory dump
20640 * mailbox command. When it successfully retrieves data, the size of the data
20684 * @phba: pointer to lpfc hba data structure.
20697 /* Get adapter Region 23 data */
20723 /* Check the data structure version */
20782 * @phba: pointer to lpfc hba data structure
20988 * @vport: pointer to vport data structure.
21496 * @phba: pointer to lpfc hba data structure.
21537 * @phba: pointer to lpfc hba data structure.
21568 * @phba: pointer to lpfc hba data structure.
21611 * @phba: pointer to lpfc hba data structure.
21674 * @phba: pointer to lpfc hba data structure
21729 * @phba: pointer to lpfc hba data structure.
21804 * @phba: pointer to lpfc hba data structure.
21824 * @phba: pointer to lpfc hba data structure.
21925 * @phba: pointer to lpfc hba data structure.
21927 * @pvt_pool: pointer to private pool data structure.
21928 * @ndlp: pointer to lpfc nodelist data structure.
21964 * @phba: pointer to lpfc hba data structure.
21999 * @phba: pointer to lpfc hba data structure.
22000 * @ndlp: pointer to lpfc nodelist data structure.
22102 * @ndlp: pointer to lpfc nodelist data structure.
22162 * lpfc_read_object - Retrieve object data from HBA
22164 * @rdobject: Pathname of object data we want to read.
22165 * @datap: Pointer to where data will be copied to.
22166 * @datasz: size of data area
22169 * The data will be truncated if datasz is not large enough.