Lines Matching defs:time
1020 /* At this point in time the HBA is either reset or DOA
1099 /* At this point in time the HBA is either reset or DOA. Either
1251 * the HBA every LPFC_HB_MBOX_INTERVAL (current 5) seconds. At the time the
1321 * From there, the idle time stat can be calculated as a
1583 "last compl time was %d ms.\n",
1600 "2857 Last completion time not "
4904 * @time: elapsed time of the scan in jiffies.
4916 int lpfc_scan_finished(struct Scsi_Host *shost, unsigned long time)
4928 if (time >= msecs_to_jiffies(30 * 1000)) {
4935 if (time >= msecs_to_jiffies(15 * 1000) &&
4948 if (vport->fc_map_cnt == 0 && time < msecs_to_jiffies(2 * 1000))
5157 * amount of time. When this situation is detected, the VMID has to be
5597 * Increment the FPIN received counter/time when it happens.
5911 * interval to the current point in time. It is called from IO completion
5912 * when we exceed our Bandwidth limitation for the time interval.
5986 * LPFC_CMF_INTERVAL, however the actual time may
5992 /* Immediately after we calculate the time since the last
5993 * timer interrupt, set the start time for the next
10340 * Sanity check for configured queue parameters against the run-time
11546 * driver unload time. Note that, it is the responsibility of the driver
13370 * here to give the HBA time to complete the IO and get entries
13399 "wait time: %d seconds.\n",
13404 "wait time: %d seconds.\n",
13409 "wait time: %d seconds.\n",
13507 /* Stop kthread signal shall trigger work_done one more time */
14151 /* Stop kthread signal shall trigger work_done one more time */