Lines Matching defs:bank_num
63 .bank_num = id, \
76 .bank_num = id, \
89 .bank_num = id, \
110 .bank_num = id, \
129 .bank_num = id, \
154 .bank_num = id, \
170 .bank_num = id, \
194 .bank_num = id, \
217 .bank_num = ID, \
280 if (b->bank_num == num)
667 if (data->num == bank->bank_num &&
1027 if ((data->bank_num == bank->bank_num) &&
1092 if (bank->bank_num == 0) {
1107 } else if (bank->bank_num > 0) {
1175 dev_dbg(dev, "setting mux of GPIO%d-%d to %d\n", bank->bank_num, pin, mux);
1206 if (bank->bank_num == 0) {
1237 } else if (bank->bank_num > 0) {
1287 if (bank->bank_num == 0) {
1296 *reg += bank->bank_num * PX30_PULL_BANK_STRIDE;
1319 if (bank->bank_num == 0) {
1328 *reg += bank->bank_num * PX30_DRV_BANK_STRIDE;
1352 if (bank->bank_num == 0) {
1360 *reg += (bank->bank_num - 1) * PX30_SCHMITT_BANK_STRIDE;
1382 if (bank->bank_num == 0) {
1390 *reg += bank->bank_num * RV1108_PULL_BANK_STRIDE;
1413 if (bank->bank_num == 0) {
1422 *reg += bank->bank_num * RV1108_DRV_BANK_STRIDE;
1446 if (bank->bank_num == 0) {
1454 *reg += (bank->bank_num - 1) * RV1108_SCHMITT_BANK_STRIDE;
1476 if (bank->bank_num == 0) {
1490 *reg += (bank->bank_num - 1) * RV1126_PULL_BANK_STRIDE;
1513 if (bank->bank_num == 0) {
1528 *reg += (bank->bank_num - 1) * RV1126_DRV_BANK_STRIDE;
1552 if (bank->bank_num == 0) {
1567 *reg += (bank->bank_num - 1) * RV1126_SCHMITT_BANK_STRIDE;
1588 *reg += bank->bank_num * RK3308_SCHMITT_BANK_STRIDE;
1607 *reg += bank->bank_num * RK2928_PULL_BANK_STRIDE;
1625 *reg += bank->bank_num * RK2928_PULL_BANK_STRIDE;
1646 if (bank->bank_num == 0 && pin_num < 12) {
1660 *reg += bank->bank_num * RK3188_PULL_BANK_STRIDE;
1683 if (bank->bank_num == 0) {
1696 *reg += bank->bank_num * RK3188_PULL_BANK_STRIDE;
1719 if (bank->bank_num == 0) {
1732 *reg += bank->bank_num * RK3288_DRV_BANK_STRIDE;
1752 *reg += bank->bank_num * RK3188_PULL_BANK_STRIDE;
1771 *reg += bank->bank_num * RK3288_DRV_BANK_STRIDE;
1790 *reg += bank->bank_num * RK3188_PULL_BANK_STRIDE;
1809 *reg += bank->bank_num * RK3288_DRV_BANK_STRIDE;
1828 if (bank->bank_num == 0) {
1841 *reg += bank->bank_num * RK3188_PULL_BANK_STRIDE;
1861 if (bank->bank_num == 0) {
1874 *reg += bank->bank_num * RK3288_DRV_BANK_STRIDE;
1895 if ((bank->bank_num == 0) || (bank->bank_num == 1)) {
1899 *reg += bank->bank_num * RK3188_PULL_BANK_STRIDE;
1910 *reg += bank->bank_num * RK3188_PULL_BANK_STRIDE;
1928 if ((bank->bank_num == 0) || (bank->bank_num == 1))
1955 if (bank->bank_num == 0) {
1958 *reg += bank->bank_num * RK3568_PULL_BANK_STRIDE;
1966 *reg += (bank->bank_num - 1) * RK3568_PULL_BANK_STRIDE;
1989 if (bank->bank_num == 0) {
1999 *reg += (bank->bank_num - 1) * RK3568_DRV_BANK_STRIDE;
2122 u8 bank_num = bank->bank_num;
2123 u32 pin = bank_num * 32 + pin_num;
2147 u8 bank_num = bank->bank_num;
2148 u32 pin = bank_num * 32 + pin_num;
2173 u8 bank_num = bank->bank_num;
2174 u32 pin = bank_num * 32 + pin_num;
2290 bank->bank_num, pin_num, strength);
2447 if (ctrl->type == RK3568 && bank->bank_num == 0 && pin_num >= 27 && pin_num <= 30) {
2470 dev_dbg(dev, "setting pull of GPIO%d-%d to %d\n", bank->bank_num, pin_num, pull);
2511 if (ctrl->type == RK3568 && bank->bank_num == 0 && pin_num >= 27 && pin_num <= 30) {
2551 *reg += bank->bank_num * RK3328_SCHMITT_BANK_STRIDE;
2571 if (bank->bank_num == 0) {
2577 *reg += (bank->bank_num - 1) * RK3568_SCHMITT_BANK_STRIDE;
2627 bank->bank_num, pin_num, enable);
3286 if (ctrl->iomux_recalced[j].num == bank->bank_num) {
3296 if (ctrl->iomux_routes[j].bank_num == bank->bank_num) {