Lines Matching refs:time
46 * between each attampt. When the busy bit is still set at that time,
117 * returns the correct value, if at any time the register
118 * doesn't become available in time, reg will be 0xffffffff
233 * returns the correct value, if at any time the register
234 * doesn't become available in time, reg will be 0xffffffff
1917 * there is no filter for it at this time.
5634 * and the appropriate time should be 1000 micro seconds
5635 * 2005/06/05 - On 11G, we also need this delay time.
6208 * Usually the CCK SIFS time should be set to 10 and the OFDM SIFS
6209 * time should be set to 16. However, the original Ralink driver uses
10683 * Send signal during boot time to initialize firmware.
11606 * infinitly and thus dropping it after some time.
12173 survey->time = div_u64(chan_survey->time_idle + chan_survey->time_busy, 1000);