Lines Matching defs:rate
917 * Detect RX rate, always use MCS as signal type.
1043 * but ended up in an aggregate the used tx rate doesn't correlate
1045 * with the same rate.
1053 * Hence, replace the requested rate with the real tx rate to not
1054 * confuse the rate control algortihm by providing clearly wrong
1075 * lower rate for all rates. In the TX_STA_FIFO, the MCS field
2032 /* default protection rate for HT20: OFDM 24M */
2035 /* default protection rate for HT40: duplicate OFDM 24M */
2065 * all HT transmissions using a CCK rate.
3888 * Usually max rate_power is the gain of the OFDM 6M rate. The antenna
4739 * .11b data rate need add additional 4dbm
5301 * BBP R1 register. TX_PWR_CFG_X allow to configure per rate TX power values,
5302 * 4 bits for each rate (tune from 0 to 15 dBm). BBP_R1 controls transmit power
5304 * Reference per rate transmit power values are located in the EEPROM at
6260 int rate;
6266 rate = 125;
6268 rate = clk_get_rate(clk) / 3000000;
6272 rate = clk_get_rate(clk) / 1000000;
6277 rt2x00_set_field32(®, US_CYC_CNT_CLOCK_CYCLE, rate);
11587 * to rate[0].count setting of minstrel rate control algorithm.
11620 * more then one tx rate per frame but since the hw will