Lines Matching defs:firmware
9 #include <linux/firmware.h>
289 * sleep activate request to the firmware and turns off the traffic.
297 /* Might still be loading firmware */
332 * sends a host sleep cancel request to the firmware.
536 * FLR respectively. Reconfigure the software and firmware including firmware
657 /* The 88W8897 PCIe+USB firmware (latest version 15.68.19.p21) sometimes
791 /* Allocate skb here so that firmware can DMA data from it */
850 /* Allocate skb here so that firmware can DMA data from it */
994 * driver maintaines the write pointer and firmware maintaines the read
1067 * driver maintaines the read pointer and firmware maintaines the write
1140 * driver maintaines the read pointer and firmware maintaines the write
1340 /* Read the TX ring read pointer set by firmware */
1509 /* The firmware (latest version 15.68.19.p21) of the 88W8897 PCIe+USB card
1534 "%#x> and sent packet to firmware successfully\n",
1579 /* Read the RX ring Write pointer set by firmware */
1686 /* Read the RX ring Write pointer set by firmware */
1768 /* This function init rx port in firmware which in turn enables to receive data
1835 In response to door bell interrupt, the firmware will perform
1981 will prevent firmware from writing to the same response
2020 * This function handles firmware event ready interrupt
2046 /* Read the event ring write pointer set by firmware */
2135 /* Read the event ring write pointer set by firmware */
2186 /* Combo firmware image is a combination of
2197 const void *firmware, u32 firmware_len) {
2213 fwdata = firmware + offset;
2228 /* Image start with cmd1, already wifi-only firmware */
2231 "input wifi-only firmware\n");
2287 * This function downloads the firmware to the card.
2297 u8 *firmware = fw->fw_buf;
2306 if (!firmware || !firmware_len) {
2308 "No firmware image found! Terminating download\n");
2334 /* PCIE FLR case: extract wifi part from combo firmware*/
2336 ret = mwifiex_extract_wifi_fw(adapter, firmware, firmware_len);
2343 "info: dnld wifi firmware from %d bytes\n", offset);
2346 /* Perform firmware data transfer */
2406 memmove(skb->data, &firmware[offset], txlen);
2415 "Failed to send firmware download command\n");
2462 * This function checks the firmware status in card.
2490 /* Wait for firmware initialization event */
2603 * This function reads the interrupt status from firmware and assigns
2739 * the type. The firmware handles the packets based upon this set type.
2780 mwifiex_dbg(adapter, ERROR, "failed to read firmware status");
2800 /* This function read/write firmware */
2845 /* This function dump firmware memory to file */
2871 mwifiex_dbg(adapter, MSG, "== mwifiex firmware dump start ==\n");
2881 /* W8997 chipset firmware dump will be restore in single region*/
2971 mwifiex_dbg(adapter, MSG, "== mwifiex firmware dump end ==\n");
3274 * This function gets the firmware name for downloading by revision id
3390 /* tx_buf_size might be changed to 3584 by firmware during