Lines Matching defs:frame
191 * example, uCode issues N_3945_RX when it sends a received frame
487 * __le32 frame_ptr; frame pointer
1232 __le16 byte_count; /* frame's byte-count */
1233 __le16 frame_time; /* frame's time on the air */
1269 * 1: Use Request-To-Send protocol before this frame.
1275 * 1: Transmit Clear-To-Send to self before this frame.
1295 * Set when Txing a block-ack request frame. Also set TX_CMD_FLG_ACK_MSK. */
1316 /* 1: This frame is non-last MPDU; more fragments are coming.
1320 /* 1: uCode calculates and inserts Timestamp Function (TSF) in outgoing frame.
1321 * 0: No TSF required in outgoing frame.
1326 * alignment of frame's payload data field.
1329 * field (but not both). Driver must align frame data (i.e. data following
1368 * MPDU or MSDU byte count for next frame.
1370 * Same as "len", but for next frame. Set to 0 if not applicable.
1454 * MPDU or MSDU byte count for next frame.
1456 * Same as "len", but for next frame. Set to 0 if not applicable.
1525 * If the fragment flag in the MAC header for the frame being transmitted
1526 * is set and there is insufficient time to transmit the next frame, the
1645 /* # tx attempts for first frame in aggregation */
1649 /* Command ID and sequence number of Tx command for this frame */
1660 * a single frame. Multiple attempts, at various bit rates, may have
1661 * been made for this frame.
1666 * frame in this new agg block failed in previous agg block(s).
1686 /* For non-agg: Rate at which frame was successful.
1690 /* For non-agg: RTS + CTS + frame tx attempts time + ACK.
1699 * For non-agg: frame status TX_STATUS_*
1700 * For agg: status of 1st frame, AGG_TX_STATE_*; other frame status
1704 * 15-12: Retry count for 1st frame in aggregation (retries
1705 * occur if tx failed for this frame when it was a
1709 * 31-16: Sequence # for this frame's Tx cmd (not SSN!)
1713 DECLARE_FLEX_ARRAY(struct agg_tx_status, agg_status); /* for each agg frame */
1854 * Number of Tx retries allowed for a frame, before that frame will
1856 * (scheduler will then try to tx it as single frame).
1921 * uses two sets of frame Tx success history: One for the current/active
1936 * When the 4965 device makes multiple tx attempts for a given frame, each
1995 * 6) Re-evaluate the rate after each tx frame. If working with block-
2029 * not considered in this calculation; it assumes that frame size will average
2261 * bit 4 - '1' Put radio to sleep when receiving frame for others
2511 * Probe request frame, followed by channel list.
2513 * Size of probe request frame is specified by byte count in tx_cmd.
2514 * Channel list follows immediately after probe request frame.
2555 * Probe request frame, followed by channel list.
2557 * Size of probe request frame is specified by byte count in tx_cmd.
2558 * Channel list follows immediately after probe request frame.
2669 struct ieee80211_hdr frame[]; /* beacon frame */
2677 struct ieee80211_hdr frame[]; /* beacon frame */
2833 __le32 beacon_silence_rssi_a; /* RSSI silence after beacon frame */
2834 __le32 beacon_silence_rssi_b; /* RSSI silence after beacon frame */
2835 __le32 beacon_silence_rssi_c; /* RSSI silence after beacon frame */
3339 * The first 4 bytes of the RX frame header contain both the RX frame
3346 * 13-00: RX frame size