Lines Matching defs:data
187 * @set: Indicate we need to swap data
200 u32 mask, data, last_bit, bits_shifted, first_bit;
205 data = 0;
242 data = ath5k_hw_bitswap(val, num_bits);
255 rfb[entry] |= ((data << position) << (col * 8)) & mask;
256 data >>= (8 - position);
258 data |= (((rfb[entry] & mask) >> (col * 8)) >> position)
266 data = set ? 1 : ath5k_hw_bitswap(data, num_bits);
268 return data;
681 u32 data, type;
695 data = ath5k_hw_reg_read(ah, AR5K_PHY_PAPD_PROBE);
698 if (!(data & AR5K_PHY_PAPD_PROBE_TX_NEXT)) {
699 ah->ah_gain.g_current = data >> AR5K_PHY_PAPD_PROBE_GAINF_S;
700 type = AR5K_REG_MS(data, AR5K_PHY_PAPD_PROBE_TYPE);
1200 u32 data;
1205 data = ath5k_hw_rf5110_chan2athchan(channel);
1206 ath5k_hw_reg_write(ah, data, AR5K_RF_BUFFER);
1219 * we need to add some offsets and extra flags to the data values we pass
1317 u32 data, data0, data1, data2;
1320 data = data0 = data1 = data2 = 0;
1371 data = (data0 << 4) | (data1 << 1) | (data2 << 2) | 0x1001;
1373 ath5k_hw_reg_write(ah, data & 0xff, AR5K_RF_BUFFER);
1374 ath5k_hw_reg_write(ah, (data >> 8) & 0x7f, AR5K_RF_BUFFER_CONTROL_5);
1391 u32 data, data0, data2;
1394 data = data0 = data2 = 0;
1416 data = (data0 << 4) | data2 << 2 | 0x1001;
1418 ath5k_hw_reg_write(ah, data & 0xff, AR5K_RF_BUFFER);
1419 ath5k_hw_reg_write(ah, (data >> 8) & 0x7f, AR5K_RF_BUFFER_CONTROL_5);
1512 * fix QAM constellation by sampling data from rxed frames.
2655 * calibration data
2660 * Get the surrounding per-rate power calibration data
2757 * we have such data from EEPROM's Conformance Test
2854 * -if we don't have calibration data for this specific channel- from the
2855 * available surrounding channels we have calibration data for, after we do a
2870 * do is fill the values below and above calibration range since eeprom data