Lines Matching defs:param

633 	u32 param;
659 		param = WMI_PDEV_PARAM_TXPOWER_LIMIT2G;
660 		ret = ath12k_wmi_pdev_set_param(ar, param,
669 		param = WMI_PDEV_PARAM_TXPOWER_LIMIT5G;
670 		ret = ath12k_wmi_pdev_set_param(ar, param,
680 	ath12k_warn(ar->ab, "failed to recalc txpower limit %d using pdev param %d: %d\n",
681 		    txpower / 2, param, ret);
706 	/* Need not send duplicate param value to firmware */
727 	u32 param;
739 	param = WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS;
740 	ret = ath12k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id, param,
748 	param = WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS;
749 	ret = ath12k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id, param,
757 	param = WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS;
758 	ret = ath12k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id, param,
1861 	arg.param = WMI_AP_PS_PEER_PARAM_UAPSD;
1867 	arg.param = WMI_AP_PS_PEER_PARAM_MAX_SP;
1874 	arg.param = WMI_AP_PS_PEER_PARAM_SIFS_RESP_FRMTYPE;
1880 	arg.param = WMI_AP_PS_PEER_PARAM_SIFS_RESP_UAPSD;
1889 	ath12k_warn(ar->ab, "failed to set ap ps peer param %d for vdev %i: %d\n",
1890 		    arg.param, arvif->vdev_id, ret);
2592 				   "he oper param: %x set for VDEV: %d\n",
3375 	 * fixed param.
4009 		ath12k_warn(ar->ab, "could not set rx wake param %d\n", ret);
6173 	struct ath12k_wmi_peer_create_arg param;
6201 		param.vdev_id = arvif->vdev_id;
6202 		param.peer_type = WMI_PEER_TYPE_DEFAULT;
6203 		param.peer_addr = ar->mac_addr;
6205 		ret = ath12k_peer_create(ar, arvif, NULL, &param);
6315 ath12k_set_vdev_param_to_all_vifs(struct ath12k *ar, int param, u32 value)
6322 		ath12k_dbg(ar->ab, ATH12K_DBG_MAC, "setting mac vdev %d param %d value %d\n",
6323 			   param, arvif->vdev_id, value);
6326 						    param, value);
6328 			ath12k_warn(ar->ab, "failed to set param %d for vdev %d: %d\n",
6329 				    param, arvif->vdev_id, ret);
6350 	/* Even though there's a WMI vdev param for fragmentation threshold no
6517 		ath12k_warn(ar->ab, "failed to set fixed rate param 0x%02x: %d\n",
6526 		ath12k_warn(ar->ab, "failed to set nss param %d: %d\n",
6535 		ath12k_warn(ar->ab, "failed to set sgi param %d: %d\n",
6544 		ath12k_warn(ar->ab, "failed to set ldpc param %d: %d\n",
6642 	 * not supported by the FW. Hence use of FIXED_RATE vdev param is not
6645 	 * can be done through the FIXED_RATE param.
6676 		 * we could set this VHT rate as peer fixed rate param, which