Lines Matching refs:reset
1182 * of the H/W from their reset values.
1208 * Herc requires EOI to be removed from reset before XGXS, so..
1217 /* Remove XGXS from reset state */
1224 * RIC_RUNNING bit is reset. Check is valid only for XframeII.
1702 * command register will be reset. We poll for this
2201 * called,all Registers are configured from their reset states
3395 * the card reset also resets the configuration space.
3450 /* Clear certain PCI/PCI-X fields after reset */
3468 /* save link up/down time/cnt, reset/memory/watchdog cnt */
3480 /* restore link up/down time/cnt, reset/memory/watchdog cnt */
3503 * XFRAME II cards after reset.
4033 DBG_PRINT(TX_DBG, "%s: Card going down for reset\n",
4386 /* reset the count to zero */
4401 goto reset;
4406 goto reset;
4433 goto reset;
4446 goto reset;
4460 goto reset;
4471 goto reset;
4483 goto reset;
4494 goto reset;
4505 goto reset;
4513 goto reset;
4526 goto reset;
4540 goto reset;
4550 goto reset;
4562 goto reset;
4576 goto reset;
4589 goto reset;
4600 goto reset;
4613 goto reset;
4621 goto reset;
4635 goto reset;
4643 reset:
4803 /* A device reset will cause the on-adapter statistics to be zero'ed.
4806 * last update to the system (which is also zero'ed on reset). This
4880 * called to set/reset promiscuous mode. Depending on the deivce flag, we
5512 * s2io_ethtool_setpause_data - set/reset pause frame generation.
5516 * It can be used to set or reset Pause frame generation or reception
6681 /* The card is being reset, no point doing anything */
7213 * function after 0.5 secs to reset the NIC. The idea is to reduce
7233 DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n", dev->name);
7246 * reset (by s2io_close) and restarted again (by s2io_open) to
7871 /* Setting swapper control on the NIC, for proper reset operation */
7978 /* reset Nic and bring it to known state */
8521 * s2io_io_slot_reset - called after the pci bus has been reset.
8525 * At this point, the card has exprienced a hard reset,
8535 pr_err("Cannot re-enable PCI device after reset.\n");
8559 pr_err("Can't bring device back up after reset.\n");
8565 pr_err("Can't restore mac addr after reset.\n");