Lines Matching refs:bytes
523 * When protocol is IPv4, the least significant bytes of the underlay
729 * When protocol is IPv4, the least significant bytes of the underlay
3797 * the rate of bytes or packets via some trap group.
3835 * Is policer limit is for bytes per sec or packets per sec.
3837 * 1 - bytes
3840 MLXSW_ITEM32(reg, qpcr, bytes, 0x04, 14, 1);
3848 * Policer's units for cir and eir fields (for bytes limits only)
3884 * For bytes limits, the rate will be this value * the unit from ir_units.
3894 * For bytes limits, the rate will be this value * the unit from ir_units.
3946 bool bytes, u32 cir, u16 cbs)
3956 mlxsw_reg_qpcr_bytes_set(payload, bytes);
4084 * Packets or bytes mode.
4100 * When in bytes mode, value is specified in units of 1000bps.
4120 * When in bytes mode, value is specified in units of 1000bps.
7373 /* Count packets and bytes */
9695 * Number of bytes to read/write (up to 48 bytes).
10376 * The requested/returned data offset from the section start, given in bytes.
10383 * The requested/returned data size, given in bytes. If data_size is not DWORD
10384 * aligned, the last bytes are zero padded.
10390 * Maximum size for this component, given in bytes.
10396 * Log 2 of the access word size in bytes. Read and write access must be aligned
10483 * Component size in bytes. Valid for UPDATE_COMPONENT instruction. Specifying
10539 * Size of the data accessed, given in bytes.
10585 /* If set, MCIA supports 128 bytes payloads. Otherwise, 48 bytes. */
10745 * rules, traps, hash, etc. Default is 96 bytes. Reserved when SwitchX-2.
11274 * Actual data field size in bytes for the current data transfer.