Lines Matching defs:egress
836 * QinQ push mode) then the EtherType is decided at the egress port.
935 * Untagged - port is an untagged member - egress transmission uses untagged
1951 * Switch multicast port to egress VID.
2173 * The switch port egress VLAN EtherType configures which EtherType to push at
2174 * egress for packets incoming through a local port for which 'SPVID.egr_et_set'
2208 * The switch multicast port to egress VID maps
2224 * Switch multicast port to egress VID.
2271 * When not valid, the egress VID will not be modified by the SMPE table.
2279 * Switch multicast port to egress VID.
2312 * Configures the profiles for queues of egress port and traffic class
2392 * The CWTPM register maps each egress port and traffic class to profile num.
4515 * The timestamp of MTPPTR at egress will be incremented by this value. Global
5963 /* Phy local loopback. When set the port's egress traffic is looped back
6885 * supported. When unified bridge model is used, this is the egress FID for
6993 /* Shared between ingress/egress */
7031 bool enable, bool egress)
7040 if (egress) {
8515 * Underlay egress router interface.
8728 * The RIGR_V2 register is used to add, remove and query egress interface list
9117 * This mapping is done at the egress, after the ACLs.
10933 * Bitwise vector of PTP message types to timestamp at egress.
11136 * Bitwise vector of PTP message types to update correction-field at egress.
12563 * PG buffer - Port PG (dir=ingress) / traffic class (dir=egress)
12803 * {ingress,egress}_port_mask[x] is (256 * port_page) + x
12828 * Bit vector for all egress network ports.
12883 * For Spectrum this is used for egress mirroring.