Lines Matching defs:data
29 u16 *data);
31 u16 data);
336 * @data: pointer to the data returned from the operation
341 u32 offset, u16 *data)
387 data);
393 data);
405 * @data: value to write to the register
410 u32 offset, u16 data)
456 offset, data);
462 offset, data);
475 * @data: buffer of data to write to the NVM
477 * Write "words" of data to the ESB2 NVM.
480 u16 words, u16 *data)
482 return e1000e_write_nvm_spi(hw, offset, words, data);
885 u16 data;
887 ret_val = e1e_rphy(hw, GG82563_PHY_MAC_SPEC_CTRL, &data);
891 data |= GG82563_MSCR_ASSERT_CRS_ON_TX;
893 data |= GG82563_MSCR_TX_CLK_1000MBPS_25;
895 ret_val = e1e_wphy(hw, GG82563_PHY_MAC_SPEC_CTRL, data);
906 ret_val = e1e_rphy(hw, GG82563_PHY_SPEC_CTRL, &data);
910 data &= ~GG82563_PSCR_CROSSOVER_MODE_MASK;
914 data |= GG82563_PSCR_CROSSOVER_MODE_MDI;
917 data |= GG82563_PSCR_CROSSOVER_MODE_MDIX;
921 data |= GG82563_PSCR_CROSSOVER_MODE_AUTO;
931 data &= ~GG82563_PSCR_POLARITY_REVERSAL_DISABLE;
933 data |= GG82563_PSCR_POLARITY_REVERSAL_DISABLE;
935 ret_val = e1e_wphy(hw, GG82563_PHY_SPEC_CTRL, data);
948 data = (E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS |
950 ret_val = e1000_write_kmrn_reg_80003es2lan(hw, reg, data);
955 ret_val = e1000_read_kmrn_reg_80003es2lan(hw, reg, &data);
958 data |= E1000_KMRNCTRLSTA_OPMODE_E_IDLE;
959 ret_val = e1000_write_kmrn_reg_80003es2lan(hw, reg, data);
963 ret_val = e1e_rphy(hw, GG82563_PHY_SPEC_CTRL_2, &data);
967 data &= ~GG82563_PSCR2_REVERSE_AUTO_NEG;
968 ret_val = e1e_wphy(hw, GG82563_PHY_SPEC_CTRL_2, data);
976 ret_val = e1e_rphy(hw, GG82563_PHY_PWR_MGMT_CTRL, &data);
986 data |= GG82563_PMCR_ENABLE_ELECTRICAL_IDLE;
987 ret_val = e1e_wphy(hw, GG82563_PHY_PWR_MGMT_CTRL, data);
991 ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &data);
995 data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
996 ret_val = e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, data);
1004 ret_val = e1e_rphy(hw, GG82563_PHY_INBAND_CTRL, &data);
1008 data |= GG82563_ICR_DIS_PADDING;
1009 ret_val = e1e_wphy(hw, GG82563_PHY_INBAND_CTRL, data);
1196 * @data: pointer to the read data
1199 * using the kumeran interface. The information retrieved is stored in data.
1203 u16 *data)
1220 *data = (u16)kmrnctrlsta;
1231 * @data: data to write at register offset
1233 * Acquire semaphore, then write the data to PHY register
1238 u16 data)
1248 E1000_KMRNCTRLSTA_OFFSET) | data;