Lines Matching defs:DEB
88 #define DEB(x,y) if (i596_debug & (x)) y
677 DEB(DEB_INIT,printk(KERN_DEBUG "%s: starting i82596.\n", dev->name));
683 DEB(DEB_INIT,printk(KERN_DEBUG "%s: i82596 initialization successful\n", dev->name));
707 DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdConfigure\n", dev->name));
712 DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdSASetup\n", dev->name));
717 DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdTDR\n", dev->name));
727 DEB(DEB_INIT,printk(KERN_DEBUG "%s: Issuing RX_START\n", dev->name));
735 DEB(DEB_INIT,printk(KERN_DEBUG "%s: Receive unit started OK\n", dev->name));
751 DEB(DEB_RXFRAME,printk(KERN_DEBUG "i596_rx(), rfd_head %p, rbd_head %p\n",
766 DEB(DEB_RXFRAME, printk(KERN_DEBUG " rfd %p, rfd.rbd %p, rfd.stat %04x\n",
775 DEB(DEB_RXADDR,print_eth(rbd->v_data, "received"));
826 DEB(DEB_ERRORS, printk(KERN_DEBUG "%s: Error, rfd.stat = 0x%04x\n",
870 DEB(DEB_RXFRAME,printk(KERN_DEBUG "frames %d\n", frames));
914 DEB(DEB_RESET,printk(KERN_DEBUG "i596_reset\n"));
942 DEB(DEB_ADDCMD,printk(KERN_DEBUG "i596_add_cmd\n"));
981 DEB(DEB_OPEN,printk(KERN_DEBUG "%s: i596_open() irq %d.\n", dev->name, dev->irq));
1027 DEB(DEB_ERRORS,printk(KERN_ERR "%s: transmit timed out, status resetting.\n",
1034 DEB(DEB_ERRORS,printk(KERN_ERR "Resetting board.\n"));
1039 DEB(DEB_ERRORS,printk(KERN_ERR "Kicking board.\n"));
1056 DEB(DEB_STARTTX,printk(KERN_DEBUG "%s: i596_start_xmit(%x,%p) called\n",
1094 DEB(DEB_TXADDR,print_eth(skb->data, "tx-queued"));
1177 DEB(DEB_PROBE,printk(KERN_INFO "%s: 82596 at %#3lx,", dev->name, dev->base_addr));
1180 DEB(DEB_PROBE,printk(" %2.2X", eth_addr[i]));
1183 DEB(DEB_PROBE,printk(" IRQ %d.\n", dev->irq));
1185 DEB(DEB_PROBE,printk(KERN_INFO "%s", version));
1194 DEB(DEB_INIT,printk(KERN_DEBUG "%s: lp at 0x%08lx (%zd bytes), "
1258 DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt, IRQ %d, status %4.4x.\n",
1268 DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt completed command.\n", dev->name));
1270 DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt command unit inactive %x.\n", dev->name, status & 0x0700));
1275 DEB(DEB_STATUS,printk(KERN_DEBUG "cmd_head->status = %04x, ->command = %04x\n",
1287 DEB(DEB_TXADDR,print_eth(skb->data, "tx-done"));
1312 DEB(DEB_TDR,printk(KERN_INFO "%s: link ok.\n", dev->name));
1321 DEB(DEB_TDR,printk(KERN_INFO "%s: Time %d.\n", dev->name, status & 0x07ff));
1347 DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt received a frame.\n", dev->name));
1352 DEB(DEB_ERRORS,printk(KERN_ERR "%s: i596 interrupt receive unit inactive, status 0x%x\n", dev->name, status));
1382 DEB(DEB_INTS,printk(KERN_DEBUG "%s: exiting interrupt.\n", dev->name));
1395 DEB(DEB_INIT,printk(KERN_DEBUG "%s: Shutting down ethercard, status was %4.4x.\n",
1407 DEB(DEB_STRUCT,i596_display_data(dev));
1446 DEB(DEB_MULTI,printk(KERN_DEBUG "%s: set multicast list, %d entries, promisc %s, allmulti %s\n",
1499 DEB(DEB_MULTI,printk(KERN_INFO "%s: Adding address %pM\n",