Lines Matching defs:bits
2366 /* GPIO bits 0-9 used for analog switch:
2578 * properly (methinks) causing no keyup bits being set */
3000 * Note: Some bits are Audio_Mask !
3049 /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3163 * the eagles does not use the standard muxsel-bits but
3186 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3864 u8 bits;
3875 bits = micro[n];
3878 if (bits & 0x01)
3883 bits >>= 1;
4291 * The correct GPIO_OUT_EN value might have some more bits set. It should
4444 /* enable gpio bits, mask obtained via btSpy */
4469 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4470 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4729 * with these bits (on PXC200AF you need to set mux 2 here)
4758 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4759 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4771 * GPIO bits 0-9 are used for the analog switch: