Lines Matching refs:ABIT_UGURU_DEBUG
86 #define ABIT_UGURU_DEBUG(level, format, arg...) \
286 ABIT_UGURU_DEBUG(1,
295 ABIT_UGURU_DEBUG(1,
310 ABIT_UGURU_DEBUG(1,
352 ABIT_UGURU_DEBUG(3, "timeout exceeded "
361 ABIT_UGURU_DEBUG(1, "timeout exceeded "
388 ABIT_UGURU_DEBUG(retries ? 1 : 3,
425 ABIT_UGURU_DEBUG(1, "timeout exceeded waiting for "
439 ABIT_UGURU_DEBUG(1, "timeout exceeded waiting for read state "
449 ABIT_UGURU_DEBUG(1, "CMD reg does not hold 0xAC after "
481 ABIT_UGURU_DEBUG(2, "assuming sensor type %d for bank1 sensor "
505 ABIT_UGURU_DEBUG(2, "testing bank1 sensor %d\n", (int)sensor_addr);
542 ABIT_UGURU_DEBUG(2, " found volt sensor\n");
546 ABIT_UGURU_DEBUG(2, " alarm raised during volt "
549 ABIT_UGURU_DEBUG(2, " alarm not raised during volt sensor "
579 ABIT_UGURU_DEBUG(2, " found temp sensor\n");
583 ABIT_UGURU_DEBUG(2, " alarm raised during temp "
586 ABIT_UGURU_DEBUG(2, " alarm not raised during temp sensor "
635 ABIT_UGURU_DEBUG(2, "assuming %d fan sensors because of "
641 ABIT_UGURU_DEBUG(2, "detecting number of fan sensors\n");
652 ABIT_UGURU_DEBUG(2, " bank2 sensor %d does not seem "
661 ABIT_UGURU_DEBUG(2, " bank2 sensor %d does not seem "
670 ABIT_UGURU_DEBUG(2, " bank2 sensor %d does not seem "
680 ABIT_UGURU_DEBUG(2, " found: %d fan sensors\n",
691 ABIT_UGURU_DEBUG(2, "assuming %d PWM outputs because of "
696 ABIT_UGURU_DEBUG(2, "detecting number of PWM outputs\n");
704 ABIT_UGURU_DEBUG(2, " pwm channel %d does not seem "
721 ABIT_UGURU_DEBUG(2, " pwm channel %d does not seem "
737 ABIT_UGURU_DEBUG(2, " pwm channel %d does "
746 ABIT_UGURU_DEBUG(2, " pwm channel %d does "
758 ABIT_UGURU_DEBUG(2, " pwm channel %d does not seem "
766 ABIT_UGURU_DEBUG(2, " pwm channel %d does not seem "
777 ABIT_UGURU_DEBUG(2, " found: %d PWM outputs\n", (int)data->pwms);
1486 ABIT_UGURU_DEBUG(3, "timeout exceeded, will "
1491 ABIT_UGURU_DEBUG(1, "timeout exceeded %d "
1555 ABIT_UGURU_DEBUG(2, "no Abit uGuru found, data = 0x%02X, cmd = "