clk-iproc-pll.c - OpenGrok cross reference for /kernel/linux/linux-6.6/drivers/clk/bcm/clk-iproc-pll.c

Lines Matching defs:control_base
64 	void __iomem *control_base;
171 		     (base == pll->status_base || base == pll->control_base)))
187 		val = readl(pll->control_base + ctrl->aon.offset);
189 		iproc_pll_write(pll, pll->control_base, ctrl->aon.offset, val);
210 		val = readl(pll->control_base + ctrl->aon.offset);
212 		iproc_pll_write(pll, pll->control_base, ctrl->aon.offset, val);
239 	val = readl(pll->control_base + reset->offset);
244 	iproc_pll_write(pll, pll->control_base, reset->offset, val);
255 	val = readl(pll->control_base + dig_filter->offset);
261 	iproc_pll_write(pll, pll->control_base, dig_filter->offset, val);
263 	val = readl(pll->control_base + reset->offset);
268 	iproc_pll_write(pll, pll->control_base, reset->offset, val);
289 	val = readl(pll->control_base + ctrl->ndiv_int.offset);
296 	val = readl(pll->control_base + ctrl->pdiv.offset);
357 			val = readl(pll->control_base + ctrl->ndiv_frac.offset);
361 			iproc_pll_write(pll, pll->control_base,
372 		val = readl(pll->control_base + ctrl->macro_mode.offset);
376 		iproc_pll_write(pll, pll->control_base,
380 	iproc_pll_write(pll, pll->control_base, ctrl->vco_ctrl.u_offset, 0);
382 	val = readl(pll->control_base + ctrl->vco_ctrl.l_offset);
392 	iproc_pll_write(pll, pll->control_base, ctrl->vco_ctrl.l_offset, val);
395 	val = readl(pll->control_base + ctrl->ndiv_int.offset);
398 	iproc_pll_write(pll, pll->control_base, ctrl->ndiv_int.offset, val);
402 		val = readl(pll->control_base + ctrl->ndiv_frac.offset);
406 		iproc_pll_write(pll, pll->control_base, ctrl->ndiv_frac.offset,
411 	val = readl(pll->control_base + ctrl->pdiv.offset);
414 	iproc_pll_write(pll, pll->control_base, ctrl->pdiv.offset, val);
471 	val = readl(pll->control_base + ctrl->ndiv_int.offset);
477 		val = readl(pll->control_base + ctrl->ndiv_frac.offset);
483 	val = readl(pll->control_base + ctrl->pdiv.offset);
583 	val = readl(pll->control_base + ctrl->enable.offset);
585 	iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val);
588 	val = readl(pll->control_base + ctrl->enable.offset);
590 	iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val);
605 	val = readl(pll->control_base + ctrl->enable.offset);
607 	iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val);
623 	val = readl(pll->control_base + ctrl->mdiv.offset);
677 	val = readl(pll->control_base + ctrl->mdiv.offset);
684 	iproc_pll_write(pll, pll->control_base, ctrl->mdiv.offset, val);
708 		val = readl(pll->control_base + ctrl->sw_ctrl.offset);
710 		iproc_pll_write(pll, pll->control_base, ctrl->sw_ctrl.offset,
747 	pll->control_base = of_iomap(node, 0);
748 	if (WARN_ON(!pll->control_base))
769 		pll->status_base = pll->control_base;
842 	if (pll->status_base != pll->control_base)
853 	iounmap(pll->control_base);