Lines Matching defs:DEV_LABEL
160 #define DEV_LABEL "lanai"
165 printk(KERN_DEBUG DEV_LABEL ": " format, ##args)
169 printk(KERN_ERR DEV_LABEL ": " format, ##args); \
181 printk(KERN_DEBUG DEV_LABEL ": " format, ##args)
559 printk(KERN_ERR DEV_LABEL
797 printk(KERN_ERR DEV_LABEL "(itf %d): Timed out on "
852 printk(KERN_INFO DEV_LABEL "(itf %d): *NOT* reading EEPROM\n",
923 printk(KERN_ERR DEV_LABEL "(itf %d): error reading EEPROM byte %d\n",
966 printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM checksum bad "
973 printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM inverse checksum "
981 printk(KERN_ERR DEV_LABEL
993 printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM serial numbers "
1003 printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM magic numbers "
1010 printk(KERN_WARNING DEV_LABEL "(itf %d): warning - EEPROM "
1071 printk(KERN_INFO DEV_LABEL "(itf %d): %s changed from %s\n",
1092 printk(KERN_INFO DEV_LABEL "(itf %d): PCI got %s error\n", itf, name);
1101 printk(KERN_ERR DEV_LABEL "(itf %d): can't read PCI_STATUS: "
1112 printk(KERN_ERR DEV_LABEL "(itf %d): can't write PCI_STATUS: "
1257 printk(KERN_ERR DEV_LABEL "(itf %d): butt register "
1348 printk(KERN_INFO DEV_LABEL
1355 printk(KERN_INFO DEV_LABEL ": vcc_tx_aal0: not implemented\n");
1400 printk(KERN_INFO DEV_LABEL "(itf %d): Got bad AAL5 length "
1424 printk(KERN_INFO DEV_LABEL ": vcc_rx_aal0: not implemented\n");
1490 printk(KERN_WARNING DEV_LABEL "(itf %d): wanted %d bytes "
1562 printk(KERN_CRIT DEV_LABEL "(itf %d): *NOT* resetting - not "
1683 printk(KERN_ERR DEV_LABEL "(itf %d): Got AAL5 stream "
1825 printk(KERN_ERR DEV_LABEL "(itf %d): driver error - DMA "
1834 printk(KERN_ERR DEV_LABEL "(itf %d): re-enabling DMA\n",
1842 printk(KERN_ERR DEV_LABEL "(itf %d): sent PCI target abort\n",
1847 printk(KERN_ERR DEV_LABEL "(itf %d): driver error - "
1854 printk(KERN_ERR DEV_LABEL "(itf %d): driver error - "
1919 printk(KERN_ERR DEV_LABEL ": Found %s board-id %d -- not a "
1936 printk(KERN_ERR DEV_LABEL "(itf %d): can't enable "
1942 printk(KERN_WARNING DEV_LABEL
1952 printk(KERN_ERR DEV_LABEL "(itf %d): can't write "
2138 printk(KERN_ERR DEV_LABEL ": couldn't remap I/O space\n");
2197 DEV_LABEL, lanai)) != 0) {
2198 printk(KERN_ERR DEV_LABEL ": can't allocate interrupt\n");
2216 printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d, base=%p, irq=%u "
2219 printk(KERN_NOTICE DEV_LABEL "(itf %d): LANAI%s, serialno=%u(0x%X), "
2251 printk(KERN_INFO DEV_LABEL "(itf %d): shutting down interface\n",
2327 DPRINTK(DEV_LABEL "(itf %d): open %d.%d\n", lanai->number,
2448 return sprintf(page, DEV_LABEL "(itf %d): chip=LANAI%s, "
2560 printk(KERN_ERR DEV_LABEL
2565 atmdev = atm_dev_register(DEV_LABEL, &pci->dev, &ops, -1, NULL);
2567 printk(KERN_ERR DEV_LABEL
2594 .name = DEV_LABEL,