Lines Matching refs:device
2859 /* No point of asking this information again when not doing hard reset, as the device
3280 /* The device ARC works with 32-bits addresses, and because there is a single HW register
3535 /* Allocate device structure */
3710 * @hdev: pointer to the habanalabs device structure
4824 dev_err(hdev->dev, "Failed to communicate with device CPU (timeout)\n");
5117 * @hdev: pointer to habanalabs device structure.
5950 /* Perform read from the device to make sure device is up */
5961 * Before pushing u-boot/linux to device, need to set the hbm bar to
6011 /* Perform read from the device to flush all configuration */
6031 * @hdev: pointer to the habanalabs device structure
6053 * which will still have the halt indication, and will reboot the device.
6106 * @hdev: pointer to the habanalabs device structure
6117 /* Set device to handle FLR by H/W as we will put the device
6151 * @hdev: pointer to the habanalabs device structure
6214 dev_err(hdev->dev, "Timeout while waiting for device to reset 0x%x\n", reg_val);
6246 * secured device with preboot only.
6556 /* make sure device CPU will read latest data from host */
7394 return hdev->pdev->device;
10530 /* No need to clear user registers if the device has just
10775 * for device with 6 HBMs the scramble is: