Lines Matching defs:enable
44 static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* Enable switches */
56 module_param_array(enable, bool, NULL, 0444);
57 MODULE_PARM_DESC(enable, "Enable C-Media PCI soundcard.");
76 #define CM_CHEN1 0x00020000 /* ch1: enable */
77 #define CM_CHEN0 0x00010000 /* ch0: enable */
110 #define CM_AC3EN1 0x00100000 /* enable AC3: model 037 */
186 #define CM_ENWR8237 0x10000000 /* enable bus master to write 8237 base reg */
197 #define CM_ENSPDOUT 0x00800000 /* enable XSPDIF/OUT to I/O interface */
199 #define CM_DAC2SPDO 0x00200000 /* enable wave+fm_midi -> SPDIF/OUT */
200 #define CM_INVIDWEN 0x00100000 /* internal vendor ID write enable, model 039? */
209 #define CM_EXBASEN 0x00001000 /* external bass input enable */
221 #define CM_ENDBDAC 0x00800000 /* enable double dac */
225 #define CM_FM_EN 0x00080000 /* enable legacy FM */
226 #define CM_AC3EN2 0x00040000 /* enable AC3: model 039 */
261 #define CM_X_ADPCM 0x04 /* SB16 ADPCM enable */
286 #define CM_X3DEN 0x02 /* 3D surround enable */
288 #define CM_CDPLAY 0x01 /* enable SPDIF/IN PCM -> DAC */
343 #define CM_RLOOPREN 0x04 /* Rec. R-channel enable */
344 #define CM_RLOOPLEN 0x02 /* Rec. L-channel enable */
664 /* FIXME: Setup (Do we've to set an other register first to enable this?) */
880 /* enable channel */
1270 /* playback - enable spdif only on the certain condition */
1287 /* playback (via device #2) - enable spdif always */
1626 /* enable dual DAC mode again */
2950 /* enable FM */
3152 /* enable UART */
3156 "cannot enable MPU-401 port at %#lx\n",
3238 if (! enable[dev]) {