Lines Matching defs:time
149 * @orig_flags: channel flags at registration time, used by regulatory
163 * @dfs_cac_ms: DFS CAC time in milliseconds, this is valid for DFS channels.
927 * @SURVEY_INFO_TIME: active time (in ms) was filled in
928 * @SURVEY_INFO_TIME_BUSY: busy time was filled in
929 * @SURVEY_INFO_TIME_EXT_BUSY: extension channel busy time was filled in
930 * @SURVEY_INFO_TIME_RX: receive time was filled in
931 * @SURVEY_INFO_TIME_TX: transmit time was filled in
932 * @SURVEY_INFO_TIME_SCAN: scan time was filled in
933 * @SURVEY_INFO_TIME_BSS_RX: local BSS receive time was filled in
958 * @time: amount of time in ms the radio was turn on (on the channel)
959 * @time_busy: amount of time the primary channel was sensed busy
960 * @time_ext_busy: amount of time the extension channel was sensed busy
961 * @time_rx: amount of time the radio spent receiving data
962 * @time_tx: amount of time the radio spent transmitting data
963 * @time_scan: amount of time the radio spent for scanning
964 * @time_bss_rx: amount of time the radio spent receiving data on a local BSS
973 u64 time;
1161 * @inactivity_timeout: time in seconds to determine station's inactivity.
1530 * @BSS_PARAM_FLAGS_SHORT_SLOT_TIME: whether short slot time is enabled
1613 * @connected_time: time(in secs) since a station is last connected
1614 * @inactive_time: time since last station activity (tx/rx) in milliseconds
1637 * This number should increase every time the list of stations
1816 * @exptime: expiration time for the mesh path from now, in msecs
1821 * This number should increase every time the list of mesh paths
1851 * @use_short_slot_time: Whether the use of short slot time is allowed
1899 * @min_discovery_timeout: the minimum length of time to wait until giving up on
1901 * @dot11MeshHWMPactivePathTimeout: the time (in TUs) for which mesh STAs
1903 * root to be valid. (TU = time unit)
1904 * @dot11MeshHWMPpreqMinInterval: the minimum interval of time (in TUs) during
1907 * @dot11MeshHWMPperrMinInterval: the minimum interval of time (in TUs) during
1910 * @dot11MeshHWMPnetDiameterTraversalTime: the interval of time (in TUs) that
1913 * @dot11MeshHWMPRannInterval: the interval of time (in TUs) between root
1927 * @dot11MeshHWMPactivePathToRootTimeout: The time (in TUs) for which mesh STAs
1931 * @dot11MeshHWMProotInterval: The interval of time (in TUs) between proactive
1933 * @dot11MeshHWMPconfirmationInterval: The minimum interval of time (in TUs)
1941 * peering with for longer than this time (in seconds), then remove it
2049 * @txop: Maximum burst time in units of 32 usecs, 0 meaning disabled
2099 * @scan_start_tsf: scan start time in terms of the TSF of the BSS that the
2144 * %duration_mandatory is not set, this is the maximum dwell time and
2145 * the actual dwell time may be shorter.
2151 * @scan_start: time (in jiffies) when the scan started
2277 * @scan_start: start time of the scheduled scan
2295 * immediately (or at any other time), if this feature is not
2365 * received; should match the time when the frame was actually
2370 * @parent_tsf: the time at the start of reception of the first octet of the
2371 * timestamp field of the frame. The time is the TSF of the BSS specified
2878 * @pmk_reauth_threshold: Threshold time for reauthentication (percentage of
3218 * @ttl: time to live counter in DW.
3320 * of how much time the responder was busy
3424 * @host_time: host time (use ktime_get_boottime() adjust to the time when the
3426 * @ap_tsf: AP's TSF at measurement time
3432 * one type at a time, but you can report multiple results separately and
3758 * @mgmt_tx_cancel_wait: Cancel the wait time from transmitting a management
3863 * If the admitted time is 0 just validate the parameters to make sure
4802 * @max_remain_on_channel_duration: Maximum time a remain-on-channel operation
5219 * @cac_time_ms: CAC time in ms
6293 * function when you detect a BSS is gone. Normally BSSes will also time
7034 * time it is accessed in __cfg80211_roamed() due to delay in scheduling