Lines Matching refs:xhci_dbg
791 xhci_dbg(xhci, "%s: stopping usb%d port polling.\n",
947 xhci_dbg(xhci, "config port %d-%d wake bits, portsc: 0x%x, write: 0x%x\n",
1020 xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
1194 xhci_dbg(xhci, "Stop HCD\n");
1203 xhci_dbg(xhci, "// Disabling event ring interrupts\n");
1209 xhci_dbg(xhci, "cleaning up memory\n");
1212 xhci_dbg(xhci, "xhci_stop completed - status = %x\n",
1224 xhci_dbg(xhci, "Initialize the xhci_hcd\n");
1230 xhci_dbg(xhci, "Start the primary HCD\n");
1233 xhci_dbg(xhci, "Start the secondary HCD\n");
1292 xhci_dbg(xhci, "%s: starting port polling.\n", __func__);
1401 xhci_dbg(xhci, "xHCI %s called with unaddressed device\n",
1408 xhci_dbg(xhci, "xHCI %s called with udev and "
1527 xhci_dbg(xhci, "urb submitted during PCI suspend\n");
1531 xhci_dbg(xhci, "Can't queue urb, port error, link inactive\n");
1573 xhci_dbg(xhci, "Ep 0x%x: URB %p submitted for non-responsive xHCI host.\n",
1800 xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
1803 xhci_dbg(xhci, "xHCI %s - can't drop slot or ep 0 %#x\n",
1845 xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",
1895 xhci_dbg(xhci, "xHCI %s - can't add slot or ep 0 %#x\n",
1967 xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",
2928 xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
3019 xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
3157 xhci_dbg(xhci, "endpoint disable with ep_state 0x%x\n",
3257 xhci_dbg(xhci, "%s: Failed to queue stop ep command, %d ",
3288 xhci_dbg(xhci, "%s: Failed to queue config ep command, %d ",
3362 xhci_dbg(xhci, "xHCI HW only supports %u stream ctx entries.\n",
3391 xhci_dbg(xhci, "Ep 0x%x only supports %u stream IDs.\n",
3485 xhci_dbg(xhci, "Driver wants %u stream IDs (including stream 0).\n",
3491 xhci_dbg(xhci, "xHCI controller does not support streams.\n");
3541 xhci_dbg(xhci, "Need %u stream ctx entries for %u stream IDs.\n",
3592 xhci_dbg(xhci, "Slot %u ep ctx %u now has streams.\n",
3780 xhci_dbg(xhci, "The device to be reset with slot ID %u does "
3797 xhci_dbg(xhci, "The device to be reset with slot ID %u does "
3815 xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id);
3824 xhci_dbg(xhci, "Couldn't allocate command structure.\n");
3833 xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
3856 xhci_dbg(xhci, "Can't reset device (slot ID %u) in %s state\n",
3859 xhci_dbg(xhci, "Not freeing device rings.\n");
3864 xhci_dbg(xhci, "Successful reset device command.\n");
4052 xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
4169 xhci_dbg(xhci, "Slot already in default state\n");
4493 xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n",
5137 xhci_dbg(xhci, "Could not allocate xHCI TT structure.\n");
5158 xhci_dbg(xhci, "xHCI version %x needs hub "
5176 xhci_dbg(xhci, "xHCI version %x doesn't need hub "
5183 xhci_dbg(xhci, "Set up %s for hub device.\n",
5317 xhci_dbg(xhci, "Resetting HCD\n");
5322 xhci_dbg(xhci, "Reset complete\n");
5338 xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
5348 xhci_dbg(xhci, "Enabling 32-bit DMA addresses.\n");
5352 xhci_dbg(xhci, "Calling HCD init\n");
5357 xhci_dbg(xhci, "Called HCD init\n");