Lines Matching defs:serial_out
179 static inline void serial_out(struct uart_omap_port *up, int offset, int value)
187 serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
188 serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
190 serial_out(up, UART_FCR, 0);
281 serial_out(up, UART_IER, up->ier);
304 serial_out(up, UART_OMAP_SCR, up->scr);
324 serial_out(up, UART_OMAP_SCR, up->scr);
331 serial_out(up, UART_IER, up->ier);
345 serial_out(up, UART_IER, up->ier);
356 serial_out(up, UART_TX, up->port.x_char);
371 serial_out(up, UART_TX, xmit->buf[xmit->tail]);
393 serial_out(up, UART_IER, up->ier);
408 serial_out(up, UART_OMAP_SCR, up->scr);
436 serial_out(up, UART_IER, up->ier);
450 serial_out(up, UART_IER, up->ier);
688 serial_out(up, UART_MCR, up->mcr);
692 serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
697 serial_out(up, UART_EFR, up->efr);
698 serial_out(up, UART_LCR, lcr);
716 serial_out(up, UART_LCR, up->lcr);
766 serial_out(up, UART_LCR, UART_LCR_WLEN8);
782 serial_out(up, UART_IER, up->ier);
789 serial_out(up, UART_OMAP_WER, up->wer);
809 serial_out(up, UART_IER, 0);
819 serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC);
941 serial_out(up, UART_IER, up->ier);
942 serial_out(up, UART_LCR, cval); /* reset DLAB */
952 serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
953 serial_out(up, UART_DLL, 0);
954 serial_out(up, UART_DLM, 0);
955 serial_out(up, UART_LCR, 0);
957 serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
961 serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
963 serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
965 serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR);
987 serial_out(up, UART_FCR, up->fcr);
988 serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
990 serial_out(up, UART_OMAP_SCR, up->scr);
993 serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
994 serial_out(up, UART_MCR, up->mcr);
995 serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
996 serial_out(up, UART_EFR, up->efr);
997 serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
1004 serial_out(up, UART_OMAP_MDR1, up->mdr1);
1006 serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
1007 serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
1009 serial_out(up, UART_LCR, 0);
1010 serial_out(up, UART_IER, 0);
1011 serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
1013 serial_out(up, UART_DLL, up->dll); /* LS of divisor */
1014 serial_out(up, UART_DLM, up->dlh); /* MS of divisor */
1016 serial_out(up, UART_LCR, 0);
1017 serial_out(up, UART_IER, up->ier);
1018 serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
1020 serial_out(up, UART_EFR, up->efr);
1021 serial_out(up, UART_LCR, cval);
1031 serial_out(up, UART_OMAP_MDR1, up->mdr1);
1034 serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
1037 serial_out(up, UART_XON1, termios->c_cc[VSTART]);
1038 serial_out(up, UART_XOFF1, termios->c_cc[VSTOP]);
1041 serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
1042 serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
1043 serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR);
1045 serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG);
1091 serial_out(up, UART_MCR, up->mcr);
1092 serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
1093 serial_out(up, UART_EFR, up->efr);
1094 serial_out(up, UART_LCR, up->lcr);
1114 serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
1116 serial_out(up, UART_EFR, efr | UART_EFR_ECB);
1117 serial_out(up, UART_LCR, 0);
1119 serial_out(up, UART_IER, (state != 0) ? UART_IERX_SLEEP : 0);
1120 serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
1121 serial_out(up, UART_EFR, efr);
1122 serial_out(up, UART_LCR, 0);
1207 serial_out(up, UART_TX, ch);
1300 serial_out(up, UART_TX, ch);
1326 serial_out(up, UART_IER, 0);
1335 serial_out(up, UART_IER, ier);
1411 serial_out(up, UART_IER, 0);
1430 serial_out(up, UART_IER, up->ier);
1438 serial_out(up, UART_OMAP_SCR, up->scr);
1803 serial_out(up, UART_OMAP_MDR1, mdr1);
1805 serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_XMIT |
1830 serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE);
1832 serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */
1833 serial_out(up, UART_EFR, UART_EFR_ECB);
1834 serial_out(up, UART_LCR, 0x0); /* Operational mode */
1835 serial_out(up, UART_IER, 0x0);
1836 serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */
1837 serial_out(up, UART_DLL, up->dll);
1838 serial_out(up, UART_DLM, up->dlh);
1839 serial_out(up, UART_LCR, 0x0); /* Operational mode */
1840 serial_out(up, UART_IER, up->ier);
1841 serial_out(up, UART_FCR, up->fcr);
1842 serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
1843 serial_out(up, UART_MCR, up->mcr);
1844 serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */
1845 serial_out(up, UART_OMAP_SCR, up->scr);
1846 serial_out(up, UART_EFR, up->efr);
1847 serial_out(up, UART_LCR, up->lcr);
1851 serial_out(up, UART_OMAP_MDR1, up->mdr1);
1852 serial_out(up, UART_OMAP_WER, up->wer);