Lines Matching refs:ql4_printk
371 DEBUG2(ql4_printk(KERN_INFO, ha,
441 DEBUG2(ql4_printk(KERN_INFO, ha,
466 DEBUG2(ql4_printk(KERN_INFO, ha,
623 ql4_printk(KERN_WARNING, ha,
967 ql4_printk(KERN_WARNING, ha, "%s: qla4_82xx_rom_lock failed\n",
1057 ql4_printk(KERN_WARNING, ha,
1070 ql4_printk(KERN_WARNING, ha,
1076 ql4_printk(KERN_INFO, ha,
1081 ql4_printk(KERN_WARNING, ha,
1110 DEBUG2(ql4_printk(KERN_WARNING, ha,
1141 ql4_printk(KERN_WARNING, ha,
1210 ql4_printk(KERN_ERR, ha, "%s: write to AGT_ADDR_HI failed\n",
1241 ql4_printk(KERN_ERR, ha, "%s: write to AGT_WRDATA failed\n",
1253 ql4_printk(KERN_ERR, ha, "%s: write to AGT_CTRL failed\n",
1263 ql4_printk(KERN_ERR, ha, "%s: failed to read MD_MIU_TEST_AGT_CTRL\n",
1550 ql4_printk(KERN_ERR, ha,
1609 DEBUG2(ql4_printk(KERN_INFO, ha,
1634 ql4_printk(KERN_INFO, ha, "%s(%ld): drv_active: 0x%08x\n",
1656 ql4_printk(KERN_INFO, ha, "%s(%ld): drv_active: 0x%08x\n",
1701 ql4_printk(KERN_INFO, ha, "%s(%ld): drv_state: 0x%08x\n",
1722 ql4_printk(KERN_INFO, ha, "%s(%ld): drv_state: 0x%08x\n",
1791 ql4_printk(KERN_INFO, ha,
1797 ql4_printk(KERN_INFO, ha,
1802 ql4_printk(KERN_ERR, ha, "FW: Load firmware from flash"
1839 ql4_printk(KERN_INFO, ha, "Error in processing rdmdio entry\n");
1890 ql4_printk(KERN_INFO, ha, "Error in processing mdiobus idle\n");
1928 DEBUG2(ql4_printk(KERN_INFO, ha, "Entering fn: %s\n", __func__));
2040 DEBUG2(ql4_printk(KERN_INFO, ha, "Entering fn: %s\n", __func__));
2044 DEBUG2(ql4_printk(KERN_INFO, ha,
2055 DEBUG2(ql4_printk(KERN_INFO, ha,
2093 DEBUG2(ql4_printk(KERN_INFO, ha,
2110 ql4_printk(KERN_INFO, ha,
2116 DEBUG2(ql4_printk(KERN_INFO, ha,
2122 DEBUG2(ql4_printk(KERN_INFO, ha,
2133 DEBUG2(ql4_printk(KERN_INFO, ha, "Leaving fn: %s\n", __func__));
2157 DEBUG2(ql4_printk(KERN_INFO, ha, "Entering fn: %s\n", __func__));
2214 DEBUG2(ql4_printk(KERN_INFO, ha, "Entering fn: %s\n", __func__));
2317 DEBUG2(ql4_printk(KERN_INFO, ha, "Leaving fn: %s\n", __func__));
2329 DEBUG2(ql4_printk(KERN_INFO, ha, "Entering fn: %s\n", __func__));
2335 DEBUG2(ql4_printk(KERN_INFO, ha,
2344 DEBUG2(ql4_printk(KERN_INFO, ha, "Leaving fn: %s datacount: 0x%lx\n",
2357 DEBUG2(ql4_printk(KERN_INFO, ha, "Entering fn: %s\n", __func__));
2419 DEBUG2(ql4_printk(KERN_INFO, ha, "Entering fn: %s\n", __func__));
2451 DEBUG2(ql4_printk(KERN_INFO, ha, "Entering fn: %s\n", __func__));
2456 DEBUG2(ql4_printk(KERN_INFO, ha,
2486 DEBUG2(ql4_printk(KERN_INFO, ha, "Entering fn: %s\n", __func__));
2491 DEBUG2(ql4_printk(KERN_INFO, ha,
2496 DEBUG2(ql4_printk(KERN_INFO, ha,
2503 DEBUG2(ql4_printk(KERN_INFO, ha,
2509 DEBUG2(ql4_printk(KERN_INFO, ha,
2551 DEBUG2(ql4_printk(KERN_INFO, ha, "Leaving fn: %s datacount: 0x%x\n",
2578 DEBUG2(ql4_printk(KERN_INFO, ha,
2620 ql4_printk(KERN_ERR, ha, "%s: TIMEOUT\n",
2678 ql4_printk(KERN_ERR, ha, "%s: TIMEOUT\n", __func__);
2698 ql4_printk(KERN_ERR, ha, "%s: TIMEOUT\n",
2716 ql4_printk(KERN_ERR, ha, "%s: TIMEOUT\n",
2836 ql4_printk(KERN_ERR, ha, "%s: TIMEOUT\n", __func__);
2928 ql4_printk(KERN_ERR, ha, "%s: TIMEOUT_1\n",
2950 ql4_printk(KERN_ERR, ha, "%s: TIMEOUT_2\n",
2978 DEBUG2(ql4_printk(KERN_INFO, ha, "[%s]: fl_addr: 0x%x, count: 0x%x\n",
2985 ql4_printk(KERN_ERR, ha, "%s: Flash Read Error,Count=%d\n",
3014 ql4_printk(KERN_INFO, ha, "%s(%ld) No buffer to dump\n",
3026 ql4_printk(KERN_INFO, ha, "[%s]: starting data ptr: %p\n",
3028 ql4_printk(KERN_INFO, ha,
3031 ql4_printk(KERN_INFO, ha, "[%s]: Capture Mask obtained: 0x%x\n",
3033 ql4_printk(KERN_INFO, ha, "[%s]: Total_data_size 0x%x, %d obtained\n",
3052 ql4_printk(KERN_INFO, ha,
3065 DEBUG2(ql4_printk(KERN_INFO, ha,
3203 ql4_printk(KERN_INFO, ha,
3210 DEBUG2(ql4_printk(KERN_INFO, ha, "Leaving fn: %s Last entry: 0x%x\n",
3247 ql4_printk(KERN_INFO, ha, "%s: Unable to collect minidump\n",
3287 ql4_printk(KERN_INFO, ha, "HW State: INITIALIZING\n");
3300 ql4_printk(KERN_INFO, ha, "HW State: FAILED\n");
3308 ql4_printk(KERN_INFO, ha, "HW State: READY\n");
3327 ql4_printk(KERN_INFO, ha,
3337 DEBUG2(ql4_printk(KERN_INFO, ha,
3351 ql4_printk(KERN_INFO, ha,
3357 ql4_printk(KERN_INFO, ha,
3368 ql4_printk(KERN_INFO, ha,
3385 ql4_printk(KERN_INFO, ha, "Device state is 0x%x = %s\n", dev_state,
3390 ql4_printk(KERN_INFO, ha, "HW State: COLD/RE-INIT\n");
3417 ql4_printk(KERN_INFO, ha,
3423 ql4_printk(KERN_INFO, ha,
3442 ql4_printk(KERN_INFO, ha,
3449 ql4_printk(KERN_INFO, ha,
3520 DEBUG2(ql4_printk(KERN_INFO, ha, "Device state is 0x%x = %s\n",
3531 ql4_printk(KERN_WARNING, ha,
3541 ql4_printk(KERN_INFO, ha, "Device state is 0x%x = %s\n",
3669 ql4_printk(KERN_WARNING, ha, "ROM lock failed\n");
3676 ql4_printk(KERN_WARNING, ha,
3712 DEBUG2(ql4_printk(KERN_INFO, ha, "FLTL[%s] = 0x%x.\n", loc, *start));
3746 DEBUG2(ql4_printk(KERN_INFO, ha, "Unsupported FLT detected: "
3757 DEBUG2(ql4_printk(KERN_INFO, ha, "Inconsistent FLT detected: "
3770 DEBUG3(ql4_printk(KERN_DEBUG, ha, "FLT[%02x]: start=0x%x "
3817 DEBUG2(ql4_printk(KERN_INFO, ha,
3860 DEBUG2(ql4_printk(KERN_INFO, ha, "Inconsistent FDT detected: "
3886 DEBUG2(ql4_printk(KERN_INFO, ha, "FDT[%s]: (0x%x/0x%x) erase=0x%x "
3913 DEBUG2(ql4_printk(KERN_DEBUG, ha,
3915 DEBUG2(ql4_printk(KERN_DEBUG, ha,
4016 ql4_printk(KERN_INFO, ha, "HW State: NEED RESET\n");
4021 ql4_printk(KERN_INFO, ha, "HW State: DEVICE INITIALIZING\n");
4032 ql4_printk(KERN_INFO, ha, "Clearing AF_RECOVERY in qla4_82xx_isp_reset\n");
4113 DEBUG2(ql4_printk(KERN_INFO, ha, "%s\n", __func__));
4121 DEBUG2(ql4_printk(KERN_INFO, ha,
4134 DEBUG2(ql4_printk(KERN_INFO, ha, "%s\n", __func__));
4142 DEBUG2(ql4_printk(KERN_INFO, ha,
4183 ql4_printk(KERN_WARNING, ha,
4215 ql4_printk(KERN_WARNING, ha, "%s: Skipping retry of adapter initialization as IRQs are not attached\n",