Lines Matching refs:ql4_printk
33 ql4_printk(KERN_ERR, ha, "%s: Failed to set register window : addr written 0x%x, read 0x%x!\n",
52 ql4_printk(KERN_ERR, ha, "%s: failed read of addr 0x%x!\n",
69 ql4_printk(KERN_ERR, ha, "%s: failed wrt to addr 0x%x, data 0x%x\n",
90 ql4_printk(KERN_ERR, ha, "%s: flash lock by func %d failed, held by func %d\n",
122 ql4_printk(KERN_ERR, ha, "%s: Illegal addr = 0x%x\n",
133 ql4_printk(KERN_ERR, ha, "%s: failed to write addr 0x%x to FLASH_DIRECT_WINDOW\n!",
142 ql4_printk(KERN_ERR, ha, "%s: failed to read addr 0x%x!\n",
172 ql4_printk(KERN_ERR, ha, "%s: Illegal addr = 0x%x\n",
181 ql4_printk(KERN_ERR, ha, "%s: failed to write addr 0x%x to FLASH_DIRECT_WINDOW!\n",
196 ql4_printk(KERN_ERR, ha, "%s: failed to read addr 0x%x!\n",
212 ql4_printk(KERN_ERR, ha, "%s: failed to write addr 0x%x to FLASH_DIRECT_WINDOW!\n",
226 ql4_printk(KERN_ERR, ha, "%s: failed to read addr 0x%x!\n",
244 ql4_printk(KERN_INFO, ha, "%s: Resetting rom lock\n", __func__);
279 ql4_printk(KERN_INFO, ha, "%s: IDC Lock recovery initiated for func %d\n",
341 ql4_printk(KERN_INFO, ha, "%s: Lock by func %d failed after 2s, lock held by func %d, lock count %d, first_owner %d\n",
350 ql4_printk(KERN_INFO, ha, "%s: IDC lock failed for func %d\n",
359 ql4_printk(KERN_INFO, ha, "%s: IDC lock Recovery by %d successful\n",
365 ql4_printk(KERN_INFO, ha, "%s: IDC lock Recovery by %d failed, Retrying timeout\n",
383 ql4_printk(KERN_ERR, ha, "%s: IDC Unlock by %d failed, lock owner is %d\n",
400 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: idc_ctrl = %d\n", __func__,
411 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: idc_ctrl = %d\n", __func__,
494 DEBUG2(ql4_printk(KERN_INFO, ha,
514 ql4_printk(KERN_INFO, ha, "%s: Performing ISP error recovery\n",
518 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: reset acknowledged\n",
528 ql4_printk(KERN_INFO, ha, "%s: Non Reset owner dev init timeout\n",
546 ql4_printk(KERN_INFO, ha, "%s: drv_state = 0x%x, drv_active = 0x%x\n",
551 ql4_printk(KERN_INFO, ha, "%s: %s: RESET TIMEOUT! drv_state: 0x%08x, drv_active: 0x%08x\n",
568 ql4_printk(KERN_INFO, ha, "%s: Reset_owner turning off drv_active of non-acking function 0x%x\n",
595 DEBUG2(ql4_printk(KERN_DEBUG, ha,
608 ql4_printk(KERN_ERR, ha, "%s: Error: Invalid reset_seq_template\n",
615 DEBUG2(ql4_printk(KERN_INFO, ha,
643 ql4_printk(KERN_ERR, ha, "%s: Failed to allocate memory for boot loader cache\n",
652 ql4_printk(KERN_ERR, ha, "%s: Error reading firmware from flash\n",
656 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Read firmware from flash\n",
663 ql4_printk(KERN_ERR, ha, "%s: Error writing firmware to MS\n",
668 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Wrote firmware size %d to MS\n",
686 DEBUG2(ql4_printk(KERN_INFO, ha,
738 ql4_printk(KERN_ERR, ha, "%s: Poll Failed: 0x%08x 0x%08x 0x%08x\n",
762 ql4_printk(KERN_ERR, ha, "%s: Reset seq checksum failed\n",
783 ql4_printk(KERN_ERR, ha, "%s: Failed to allocate reset template resources\n",
794 DEBUG2(ql4_printk(KERN_INFO, ha,
802 ql4_printk(KERN_ERR, ha, "%s: Failed to read reset template\n",
814 ql4_printk(KERN_ERR, ha, "%s: Template Header size %d is invalid, tmplt_hdr_def_size %d\n",
824 DEBUG2(ql4_printk(KERN_INFO, ha,
832 ql4_printk(KERN_ERR, ha, "%s: Failed to read reset template\n",
839 ql4_printk(KERN_ERR, ha, "%s: Reset Seq checksum failed!\n",
843 DEBUG2(ql4_printk(KERN_INFO, ha,
1007 DEBUG2(ql4_printk(KERN_INFO, ha,
1066 DEBUG2(ql4_printk(KERN_INFO, ha,
1095 DEBUG2(ql4_printk(KERN_INFO, ha,
1099 ql4_printk(KERN_ERR, ha, "%s: Reset sequence completed with some timeout errors.\n",
1161 ql4_printk(KERN_ERR, ha, "%s: Unknown command ==> 0x%04x on entry = %d\n",
1179 ql4_printk(KERN_ERR, ha, "%s: Abrupt STOP Sub-Sequence end.\n",
1188 ql4_printk(KERN_ERR, ha, "%s: Abrupt START Sub-Sequence end.\n",
1197 ql4_printk(KERN_ERR, ha, "%s: Abrupt INIT Sub-Sequence end.\n",
1217 ql4_printk(KERN_INFO, ha, "%s: Graceful RESET: Not collecting minidump\n",
1226 ql4_printk(KERN_ERR, ha, "%s: Copy bootloader, firmware restart failed!\n",
1245 ql4_printk(KERN_ERR, ha, "%s: Restart error\n", __func__);
1248 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Restart done\n",
1254 ql4_printk(KERN_ERR, ha, "%s: Peg not initialized\n",
1362 ql4_printk(KERN_ERR, ha, "%s: Reset recovery disabled\n",
1368 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: HW State: NEED RESET\n",
1380 DEBUG2(ql4_printk(KERN_INFO, ha,
1411 DEBUG2(ql4_printk(KERN_INFO, ha, "SRE-Shim Ctrl:0x%x\n", val));
1414 DEBUG2(ql4_printk(KERN_INFO, ha,
1425 DEBUG2(ql4_printk(KERN_INFO, ha,
1436 DEBUG2(ql4_printk(KERN_INFO, ha,
1447 DEBUG2(ql4_printk(KERN_INFO, ha,
1458 DEBUG2(ql4_printk(KERN_INFO, ha,
1472 DEBUG2(ql4_printk(KERN_INFO, ha,
1488 DEBUG2(ql4_printk(KERN_INFO, ha,
1528 ql4_printk(KERN_INFO, ha, "Disabled pause frames successfully.\n");
1554 ql4_printk(KERN_INFO, ha, "EPORT is out of reset.\n");
1579 DEBUG2(ql4_printk(KERN_INFO, ha, "%s: drv_active = 0x%X\n",