Lines Matching refs:io_addr
570 static void __init blogic_add_probeaddr_isa(unsigned long io_addr)
578 probeinfo->io_addr = io_addr;
692 pr_probeinfo->io_addr = 0;
704 unsigned long io_addr;
716 io_addr = base_addr0 = pci_resource_start(pci_device, 0);
721 blogic_err("at PCI Bus %d Device %d I/O Address 0x%lX\n", NULL, bus, device, io_addr);
731 blogic_err("at PCI Bus %d Device %d I/O Address 0x%lX\n", NULL, bus, device, io_addr);
736 blogic_notice("BusLogic: PCI Bus %d Device %d I/O Address 0x%lX PCI Address 0x%lX\n", NULL, bus, device, io_addr, pci_addr);
744 host_adapter->io_addr = io_addr;
801 pr_probeinfo->io_addr = io_addr;
813 probeinfo->io_addr = io_addr;
844 if (pr_probeinfo->io_addr == 0 &&
849 pr_probeinfo->io_addr = 0x330;
888 unsigned long io_addr;
899 io_addr = pci_resource_start(pci_device, 0);
901 if (io_addr == 0 || irq_ch == 0)
906 if (probeinfo->io_addr == io_addr &&
944 unsigned long io_addr;
956 io_addr = base_addr0 = pci_resource_start(pci_device, 0);
961 blogic_err("at PCI Bus %d Device %d I/O Address 0x%lX\n", NULL, bus, device, io_addr);
971 blogic_err("at PCI Bus %d Device %d I/O Address 0x%lX\n", NULL, bus, device, io_addr);
976 blogic_notice("BusLogic: PCI Bus %d Device %d I/O Address 0x%lX PCI Address 0x%lX\n", NULL, bus, device, io_addr, pci_addr);
983 probeinfo->io_addr = io_addr;
994 blogic_err("BusLogic: I/O Address 0x%lX PCI Address 0x%lX, irq %d, but FlashPoint\n", NULL, io_addr, pci_addr, irq_ch);
1048 myadapter->io_addr = probeinfo->io_addr;
1103 blogic_err("Bus %d Device %d I/O Address 0x%lX PCI Address 0x%lX:\n", adapter, adapter->bus, adapter->dev, adapter->io_addr, adapter->pci_addr);
1105 blogic_err("While configuring BusLogic Host Adapter at I/O Address 0x%lX:\n", adapter, adapter->io_addr);
1128 fpinfo->base_addr = (u32) adapter->io_addr;
1134 blogic_err("BusLogic: I/O Address 0x%lX PCI Address 0x%lX, but FlashPoint\n", adapter, adapter->io_addr, adapter->pci_addr);
1139 blogic_notice("BusLogic_Probe(0x%lX): FlashPoint Found\n", adapter, adapter->io_addr);
1156 blogic_notice("BusLogic_Probe(0x%lX): Status 0x%02X, Interrupt 0x%02X, Geometry 0x%02X\n", adapter, adapter->io_addr, statusreg.all, intreg.all, georeg.all);
1235 blogic_notice("BusLogic_HardwareReset(0x%lX): Diagnostic Active, Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);
1255 blogic_notice("BusLogic_HardwareReset(0x%lX): Diagnostic Completed, Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);
1271 blogic_notice("BusLogic_HardwareReset(0x%lX): Host Adapter Ready, Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);
1328 adapter->io_addr,
1840 blogic_info(" Firmware Version: %s, I/O Address: 0x%lX, IRQ Channel: %d/%s\n", adapter, adapter->fw_ver, adapter->io_addr, adapter->irq_ch, (adapter->level_int ? "Level" : "Edge"));
2298 host->unique_id = adapter->io_addr;
2391 if (probeinfo->io_addr == 0)
2396 myadapter->io_addr = probeinfo->io_addr;
2408 if (!request_region(myadapter->io_addr, myadapter->addr_count,
2416 release_region(myadapter->io_addr,
2425 release_region(myadapter->io_addr,
2434 release_region(myadapter->io_addr,
2456 release_region(myadapter->io_addr,
2495 release_region(myadapter->io_addr,
2497 if (!request_region(myadapter->io_addr,
2503 (unsigned long)myadapter->io_addr);
2580 release_region(adapter->io_addr, adapter->addr_count);
3671 unsigned long io_addr = simple_strtoul(options,
3674 switch (io_addr) {
3694 blogic_err("BusLogic: Invalid Driver Options (invalid I/O Address 0x%lX)\n", NULL, io_addr);