Lines Matching refs:TW_DRIVER
400 TW_PRINTK(tw_dev->host, TW_DRIVER, 0x2, "Post failed while reading AEN queue");
591 TW_PRINTK(tw_dev->host, TW_DRIVER, 0x3, "Error posting request sense");
597 TW_PRINTK(tw_dev->host, TW_DRIVER, 0x4, "No valid response while draining AEN queue");
653 TW_PRINTK(tw_dev->host, TW_DRIVER, 0x5, "Memory allocation failed");
796 tw_dev->host->host_no, TW_DRIVER, 0x6,
959 TW_PRINTK(tw_dev->host, TW_DRIVER, 0x7, "No valid response during get param")
1015 TW_PRINTK(tw_dev->host, TW_DRIVER, 0x8, "No valid response during init connection");
1040 TW_PRINTK(tw_dev->host, TW_DRIVER, 0x9, "Command packet memory allocation failed");
1046 TW_PRINTK(tw_dev->host, TW_DRIVER, 0xa, "Generic memory allocation failed");
1052 TW_PRINTK(tw_dev->host, TW_DRIVER, 0xb, "Sense buffer allocation failed");
1059 TW_PRINTK(tw_dev->host, TW_DRIVER, 0xc, "Event info memory allocation failed");
1093 TW_PRINTK(tw_dev->host, TW_DRIVER, 0xd, "Microcontroller Error: clearing");
1194 TW_PRINTK(tw_dev->host, TW_DRIVER, 0xe, "Received a request id that wasn't posted");
1204 TW_PRINTK(tw_dev->host, TW_DRIVER, 0xf, "Error completing AEN during attention interrupt");
1278 TW_PRINTK(tw_dev->host, TW_DRIVER, 0x10, "Controller never went non-ready during reset sequence");
1283 TW_PRINTK(tw_dev->host, TW_DRIVER, 0x11, "Controller not ready during reset sequence");
1296 TW_PRINTK(tw_dev->host, TW_DRIVER, 0x12, "Initconnection failed while checking SRL");
1316 TW_PRINTK(tw_dev->host, TW_DRIVER, 0x13, "Bad controller status after loading sense buffers");
1324 TW_PRINTK(tw_dev->host, TW_DRIVER, 0x14, "AEN drain failed during reset sequence");
1442 TW_DRIVER, 0x2c, SCpnt->cmnd[0]);
1449 TW_PRINTK(tw_dev->host, TW_DRIVER, 0x15, "Controller reset failed during scsi host reset");
1507 TW_PRINTK(tw_dev->host, TW_DRIVER, 0x16, "Connection shutdown failed");
1569 TW_PRINTK(host, TW_DRIVER, 0x17, "Failed to enable pci device");
1580 TW_PRINTK(host, TW_DRIVER, 0x18, "Failed to set dma mask");
1587 TW_PRINTK(host, TW_DRIVER, 0x19, "Failed to allocate memory for device extension");
1598 TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1a, "Failed to initialize device extension");
1606 TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1b, "Failed to get mem region");
1613 TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1c, "Failed to ioremap");
1623 TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1d, "Controller reset failed during probe");
1637 TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1e, "scsi add host failed");
1669 TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1f, "Error requesting IRQ");
1684 TW_PRINTK(tw_dev->host, TW_DRIVER, 0x20, "Failed to create sysfs binary file: 3ware_aen_read");
1686 TW_PRINTK(tw_dev->host, TW_DRIVER, 0x21, "Failed to create sysfs binary file: 3ware_compat_info");
1690 TW_PRINTK(host, TW_DRIVER, 0x22, "Failed to register character device");
1774 TW_PRINTK(tw_dev->host, TW_DRIVER, 0x23, "Connection shutdown failed during suspend");
1803 TW_PRINTK(tw_dev->host, TW_DRIVER, 0x24, "Enable device failed during resume");
1814 TW_PRINTK(host, TW_DRIVER, 0x25, "Failed to set dma mask during resume");
1828 TW_PRINTK(tw_dev->host, TW_DRIVER, 0x26, "Error requesting IRQ during resume");