Lines Matching refs:value

53 			      const unsigned int word, const u8 value)
65 		rt2x00_set_field32(&reg, PHY_CSR3_VALUE, value);
80 	u8 value;
88 	 * returns the correct value, if at any time the register
103 	value = rt2x00_get_field32(reg, PHY_CSR3_VALUE);
107 	return value;
111 			     const unsigned int word, const u32 value)
123 		rt2x00_set_field32(&reg, PHY_CSR4_VALUE, value);
125 		 * RF5225 and RF2527 contain 21 bits per RF register value,
135 		rt2x00_rf_write(rt2x00dev, word, value);
656 	 * value[0] -> non-LNA
657 	 * value[1] -> LNA
659 	u8 value[2];
708 		rt73usb_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]);
1259 	 * so we may pass a useless variable to store the value.
1288 	u8 value;
1291 		value = rt73usb_bbp_read(rt2x00dev, 0);
1292 		if ((value != 0xff) && (value != 0x00))
1306 	u8 value;
1342 			value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
1343 			rt73usb_bbp_write(rt2x00dev, reg_id, value);
1725 	 * the signal is the PLCP value. If it was received with
1753 	s8 value;
1816 		value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_1);
1817 		if (value < -10 || value > 10)
1819 		value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_2);
1820 		if (value < -10 || value > 10)
1832 		value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1);
1833 		if (value < -10 || value > 10)
1835 		value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_2);
1836 		if (value < -10 || value > 10)
1847 	u16 value;
1858 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
1861 			value, rt2x00_get_field32(reg, MAC_CSR0_REVISION));
1920 	if (value == LED_MODE_SIGNAL_STRENGTH)
1924 	rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_LED_MODE, value);
1954  * RF value list for RF2528
1975  * RF value list for RF5226
2032  * RF value list for RF5225 & RF2527
2234 	 * we are free to update the registers based on the value