Lines Matching refs:time
46 * between each attampt. When the busy bit is still set at that time,
117 * returns the correct value, if at any time the register
118 * doesn't become available in time, reg will be 0xffffffff
213 * returns the correct value, if at any time the register
214 * doesn't become available in time, reg will be 0xffffffff
1884 * there is no filter for it at this time.
5500 * and the appropriate time should be 1000 micro seconds
5501 * 2005/06/05 - On 11G, we also need this delay time.
6068 * Usually the CCK SIFS time should be set to 10 and the OFDM SIFS
6069 * time should be set to 16. However, the original Ralink driver uses
9087 * Send signal during boot time to initialize firmware.
9995 * infinitly and thus dropping it after some time.
10549 survey->time = (idle + busy) / 1000;