Lines Matching defs:rate
897 * Detect RX rate, always use MCS as signal type.
1023 * but ended up in an aggregate the used tx rate doesn't correlate
1025 * with the same rate.
1033 * Hence, replace the requested rate with the real tx rate to not
1034 * confuse the rate control algortihm by providing clearly wrong
1055 * lower rate for all rates. In the TX_STA_FIFO, the MCS field
1999 /* default protection rate for HT20: OFDM 24M */
2002 /* default protection rate for HT40: duplicate OFDM 24M */
2032 * all HT transmissions using a CCK rate.
4605 * .11b data rate need add additional 4dbm
5167 * BBP R1 register. TX_PWR_CFG_X allow to configure per rate TX power values,
5168 * 4 bits for each rate (tune from 0 to 15 dBm). BBP_R1 controls transmit power
5170 * Reference per rate transmit power values are located in the EEPROM at
6120 int rate;
6126 rate = 125;
6128 rate = clk_get_rate(clk) / 3000000;
6132 rate = clk_get_rate(clk) / 1000000;
6137 rt2x00_set_field32(®, US_CYC_CNT_CLOCK_CYCLE, rate);
9976 * to rate[0].count setting of minstrel rate control algorithm.
10009 * more then one tx rate per frame but since the hw will