Lines Matching defs:firmware
21 #include <linux/firmware.h>
300 * sleep activate request to the firmware and turns off the traffic.
308 /* Might still be loading firmware */
343 * sends a host sleep cancel request to the firmware.
538 * FLR respectively. Reconfigure the software and firmware including firmware
659 /* The 88W8897 PCIe+USB firmware (latest version 15.68.19.p21) sometimes
793 /* Allocate skb here so that firmware can DMA data from it */
852 /* Allocate skb here so that firmware can DMA data from it */
996 * driver maintaines the write pointer and firmware maintaines the read
1069 * driver maintaines the read pointer and firmware maintaines the write
1142 * driver maintaines the read pointer and firmware maintaines the write
1342 /* Read the TX ring read pointer set by firmware */
1511 /* The firmware (latest version 15.68.19.p21) of the 88W8897 PCIe+USB card
1536 "%#x> and sent packet to firmware successfully\n",
1581 /* Read the RX ring Write pointer set by firmware */
1688 /* Read the RX ring Write pointer set by firmware */
1770 /* This function init rx port in firmware which in turn enables to receive data
1837 In response to door bell interrupt, the firmware will perform
1983 will prevent firmware from writing to the same response
2022 * This function handles firmware event ready interrupt
2048 /* Read the event ring write pointer set by firmware */
2137 /* Read the event ring write pointer set by firmware */
2188 /* Combo firmware image is a combination of
2199 const void *firmware, u32 firmware_len) {
2215 fwdata = firmware + offset;
2230 /* Image start with cmd1, already wifi-only firmware */
2233 "input wifi-only firmware\n");
2289 * This function downloads the firmware to the card.
2299 u8 *firmware = fw->fw_buf;
2308 if (!firmware || !firmware_len) {
2310 "No firmware image found! Terminating download\n");
2336 /* PCIE FLR case: extract wifi part from combo firmware*/
2338 ret = mwifiex_extract_wifi_fw(adapter, firmware, firmware_len);
2345 "info: dnld wifi firmware from %d bytes\n", offset);
2348 /* Perform firmware data transfer */
2408 memmove(skb->data, &firmware[offset], txlen);
2417 "Failed to send firmware download command\n");
2464 * This function checks the firmware status in card.
2492 /* Wait for firmware initialization event */
2605 * This function reads the interrupt status from firmware and assigns
2741 * the type. The firmware handles the packets based upon this set type.
2782 mwifiex_dbg(adapter, ERROR, "failed to read firmware status");
2802 /* This function read/write firmware */
2847 /* This function dump firmware memory to file */
2873 mwifiex_dbg(adapter, MSG, "== mwifiex firmware dump start ==\n");
2883 /* W8997 chipset firmware dump will be restore in single region*/
2973 mwifiex_dbg(adapter, MSG, "== mwifiex firmware dump end ==\n");
3277 * This function gets the firmware name for downloading by revision id
3393 /* tx_buf_size might be changed to 3584 by firmware during