Lines Matching defs:time
322 IL_ERR("Error sending %s: time out after %dms.\n",
424 /* Throughput OFF time(ms) ON time (ms)
454 * Need to compensate on the led on/off time per HW according to the deviation
462 il_blink_compensation(struct il_priv *il, u8 time, u16 compensation)
466 "use pre-defined blinking time\n");
467 return time;
470 return (u8) ((time * compensation) >> 6);
494 D_LED("Led blink time compensation=%u\n",
936 /* Copy the run-time flags so they are there even on
954 /* Initialize regulatory-based run-time data */
1240 * Must be set longer than active dwell time.
1360 * @ms: amount of time to wait (in milliseconds) for scan to abort
1491 * dwell time to be 98% of the smallest beacon interval
1492 * (minus 2 * channel tune time)
1579 /* mac80211 will only ask for one band at a time */
2366 * Test for this to prevent driver from sending LQ command between the time
2507 * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
2721 * time we'll skip this part. */
3013 * not have two scans at the same time, so only one is needed.
3338 * every time the priority line is asserted (BT is sending signals on the
4784 * On every watchdog tick we check (latest) time stamp. If it does not
4871 * extended beacon time format
4872 * time in usec will be changed into a 32-bit value in extended:internal format
4874 * the internal part is the time in usec within one beacon interval
5356 * procedure will time out and mac80211 will call us with NULL