Lines Matching defs:param

589 	u32 param;
615 		param = WMI_PDEV_PARAM_TXPOWER_LIMIT2G;
616 		ret = ath11k_wmi_pdev_set_param(ar, param,
625 		param = WMI_PDEV_PARAM_TXPOWER_LIMIT5G;
626 		ret = ath11k_wmi_pdev_set_param(ar, param,
636 	ath11k_warn(ar->ab, "failed to recalc txpower limit %d using pdev param %d: %d\n",
637 		    txpower / 2, param, ret);
662 	/* Need not send duplicate param value to firmware */
683 	u32 param;
695 	param = WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS;
696 	ret = ath11k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id, param,
704 	param = WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS;
705 	ret = ath11k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id, param,
713 	param = WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS;
714 	ret = ath11k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id, param,
1477 	params.param = WMI_AP_PS_PEER_PARAM_UAPSD;
1483 	params.param = WMI_AP_PS_PEER_PARAM_MAX_SP;
1490 	params.param = WMI_AP_PS_PEER_PARAM_SIFS_RESP_FRMTYPE;
1496 	params.param = WMI_AP_PS_PEER_PARAM_SIFS_RESP_UAPSD;
1505 	ath11k_warn(ar->ab, "failed to set ap ps peer param %d for vdev %i: %d\n",
1506 		    params.param, arvif->vdev_id, ret);
2721 	 * fixed param.
3285 		ath11k_warn(ar->ab, "could not set rx wake param %d\n", ret);
5273 	struct peer_create_params param;
5299 		param.vdev_id = arvif->vdev_id;
5300 		param.peer_type = WMI_PEER_TYPE_DEFAULT;
5301 		param.peer_addr = ar->mac_addr;
5303 		ret = ath11k_peer_create(ar, arvif, NULL, &param);
5399 ath11k_set_vdev_param_to_all_vifs(struct ath11k *ar, int param, u32 value)
5406 		ath11k_dbg(ar->ab, ATH11K_DBG_MAC, "setting mac vdev %d param %d value %d\n",
5407 			   param, arvif->vdev_id, value);
5410 						    param, value);
5412 			ath11k_warn(ar->ab, "failed to set param %d for vdev %d: %d\n",
5413 				    param, arvif->vdev_id, ret);
5434 	/* Even though there's a WMI vdev param for fragmentation threshold no
5594 		ath11k_warn(ar->ab, "failed to set fixed rate param 0x%02x: %d\n",
5603 		ath11k_warn(ar->ab, "failed to set nss param %d: %d\n",
5612 		ath11k_warn(ar->ab, "failed to set sgi param %d: %d\n",
5621 		ath11k_warn(ar->ab, "failed to set ldpc param %d: %d\n",
5719 	 * not supported by the FW. Hence use of FIXED_RATE vdev param is not
5722 	 * can be done through the FIXED_RATE param.
5753 		 * we could set this VHT rate as peer fixed rate param, which