Lines Matching refs:reset
1180 * of the H/W from their reset values.
1206 * Herc requires EOI to be removed from reset before XGXS, so..
1215 /* Remove XGXS from reset state */
1222 * RIC_RUNNING bit is reset. Check is valid only for XframeII.
1700 * command register will be reset. We poll for this
2199 * called,all Registers are configured from their reset states
3391 * the card reset also resets the configuration space.
3446 /* Clear certain PCI/PCI-X fields after reset */
3464 /* save link up/down time/cnt, reset/memory/watchdog cnt */
3476 /* restore link up/down time/cnt, reset/memory/watchdog cnt */
3499 * XFRAME II cards after reset.
4029 DBG_PRINT(TX_DBG, "%s: Card going down for reset\n",
4382 /* reset the count to zero */
4397 goto reset;
4402 goto reset;
4429 goto reset;
4442 goto reset;
4456 goto reset;
4467 goto reset;
4479 goto reset;
4490 goto reset;
4501 goto reset;
4509 goto reset;
4522 goto reset;
4536 goto reset;
4546 goto reset;
4558 goto reset;
4572 goto reset;
4585 goto reset;
4596 goto reset;
4609 goto reset;
4617 goto reset;
4631 goto reset;
4639 reset:
4799 /* A device reset will cause the on-adapter statistics to be zero'ed.
4802 * last update to the system (which is also zero'ed on reset). This
4874 * called to set/reset promiscuous mode. Depending on the deivce flag, we
5505 * s2io_ethtool_setpause_data - set/reset pause frame generation.
5509 * It can be used to set or reset Pause frame generation or reception
6674 /* The card is being reset, no point doing anything */
7206 * function after 0.5 secs to reset the NIC. The idea is to reduce
7226 DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n", dev->name);
7239 * reset (by s2io_close) and restarted again (by s2io_open) to
7877 /* Setting swapper control on the NIC, for proper reset operation */
7984 /* reset Nic and bring it to known state */
8527 * s2io_io_slot_reset - called after the pci bus has been reset.
8531 * At this point, the card has exprienced a hard reset,
8541 pr_err("Cannot re-enable PCI device after reset.\n");
8565 pr_err("Can't bring device back up after reset.\n");
8571 pr_err("Can't restore mac addr after reset.\n");