Lines Matching refs:bytes
558 * When protocol is IPv4, the least significant bytes of the underlay
733 * When protocol is IPv4, the least significant bytes of the underlay
3275 * the rate of bytes or packets via some trap group.
3313 * Is policer limit is for bytes per sec or packets per sec.
3315 * 1 - bytes
3318 MLXSW_ITEM32(reg, qpcr, bytes, 0x04, 14, 1);
3326 * Policer's units for cir and eir fields (for bytes limits only)
3362 * For bytes limits, the rate will be this value * the unit from ir_units.
3372 * For bytes limits, the rate will be this value * the unit from ir_units.
3424 bool bytes, u32 cir, u16 cbs)
3434 mlxsw_reg_qpcr_bytes_set(payload, bytes);
3562 * Packets or bytes mode.
3578 * When in bytes mode, value is specified in units of 1000bps.
3598 * When in bytes mode, value is specified in units of 1000bps.
6624 /* Count packets and bytes */
8722 * Number of bytes to read/write (up to 48 bytes).
9311 * The requested/returned data offset from the section start, given in bytes.
9318 * The requested/returned data size, given in bytes. If data_size is not DWORD
9319 * aligned, the last bytes are zero padded.
9325 * Maximum size for this component, given in bytes.
9331 * Log 2 of the access word size in bytes. Read and write access must be aligned
9418 * Component size in bytes. Valid for UPDATE_COMPONENT instruction. Specifying
9474 * Size of the data accessed, given in bytes.
9607 * rules, traps, hash, etc. Default is 96 bytes. Reserved when SwitchX-2.