Lines Matching defs:EL3_CMD
110 #define EL3_CMD 0x0e
116 #define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD)
119 /* The top five bits written to EL3_CMD are a command, the lower
575 outw(SelectWindow | 0, ioaddr + 0xC80 + EL3_CMD);
663 outw(TxReset, ioaddr + EL3_CMD);
664 outw(RxReset, ioaddr + EL3_CMD);
665 outw(SetStatusEnb | 0x00, ioaddr + EL3_CMD);
697 outw(TxReset, ioaddr + EL3_CMD);
698 outw(TxEnable, ioaddr + EL3_CMD);
741 outw(SetTxThreshold + 1536, ioaddr + EL3_CMD);
754 if (tx_status & 0x30) outw(TxReset, ioaddr + EL3_CMD);
755 if (tx_status & 0x3C) outw(TxEnable, ioaddr + EL3_CMD);
791 outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
800 outw(AckIntr | RxEarly, ioaddr + EL3_CMD);
808 if (tx_status & 0x30) outw(TxReset, ioaddr + EL3_CMD);
809 if (tx_status & 0x3C) outw(TxEnable, ioaddr + EL3_CMD);
815 outw(RxReset, ioaddr + EL3_CMD);
820 ioaddr + EL3_CMD);
821 outw(RxEnable, ioaddr + EL3_CMD); /* Re-enable the receiver. */
822 outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD);
830 outw(AckIntr | 0xFF, ioaddr + EL3_CMD);
834 outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD); /* Ack IRQ */
888 outw(StatsDisable, ioaddr + EL3_CMD);
905 outw(StatsEnable, ioaddr + EL3_CMD);
921 outw(RxDiscard, ioaddr + EL3_CMD);
946 outw(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */
953 outw(RxDiscard, ioaddr + EL3_CMD);
990 ioaddr + EL3_CMD);
993 outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast, ioaddr + EL3_CMD);
996 outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD);
1119 outw(StartCoax, ioaddr + EL3_CMD);
1203 outw(StatsDisable, ioaddr + EL3_CMD);
1206 outw(RxDisable, ioaddr + EL3_CMD);
1207 outw(TxDisable, ioaddr + EL3_CMD);
1211 outw(StopCoax, ioaddr + EL3_CMD);
1218 outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD);
1243 outw(StartCoax, ioaddr + EL3_CMD);
1285 outw(StatsDisable, ioaddr + EL3_CMD);
1296 outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD);
1297 outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
1299 outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
1300 outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
1302 outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD);
1305 ioaddr + EL3_CMD);
1307 ioaddr + EL3_CMD);
1333 outw(PowerDown, ioaddr + EL3_CMD);
1353 outw(PowerUp, ioaddr + EL3_CMD);