Lines Matching defs:busy
339 int busy = 0;
343 busy = 1;
346 return busy;
391 /* Keep busy mode in DPSM if enabled */
661 * Before unmasking for the busy end IRQ, confirm that the
663 * command in-progress, waiting for busy signaling to end,
667 * it starts signaling busy on DAT0, hence re-read the
668 * MMCISTATUS register here, to allow the busy bit to be set.
685 * sent, then bail out if busy status is set and wait for the
686 * busy end IRQ.
689 * monitoring DAT0 for busy completion, but there is only one
690 * status bit in MMCISTATUS for the busy state. Therefore
692 * one after the other. So, clear the busy start IRQ here.
702 * sent and the busy bit isn't set, it means we have received
703 * the busy end IRQ. Clear and mask the IRQ, then continue to
1373 * due to waiting for busy status.
1382 /* Handle busy detection on DAT0 if the variant supports it. */
1664 * causes the DPSM to stay busy (non-functional).
2085 * Enable busy detection.
2090 * Not all variants have a flag to enable busy detection
2099 /* Variants with mandatory busy timeout in HW needs R1B responses. */