Lines Matching refs:device
463 * goya_pci_bars_map - Map PCI BARS of Goya device
801 /* Allocate device structure */
1198 "Failed to setup communication with device CPU\n");
1339 * Initialize the H/W registers of the device
2305 * goya_load_firmware_to_device() - Load LINUX FW code to device.
2322 * goya_load_boot_fit_to_device() - Load boot fit to device.
2389 * Before pushing u-boot/linux to device, need to set the ddr bar to
2510 /* Perform read from the device to make sure device is up */
2561 /* Perform read from the device to flush all MSI-X configuration */
2628 "Timeout while waiting for device to reset 0x%x\n",
2780 /* Shift to the device's base physical address of host memory */
2790 /* Cancel the device's base physical address of host memory */
2870 "Can't send driver job on QMAN0 because the device is not idle\n");
3049 /* Shift to the device's base physical address of host memory */
3059 /* Cancel the device's base physical address of host memory */
3092 /* Shift to the device's base physical address of host memory */
3105 /* Cancel the device's base physical address of host memory */
3373 "Got DMA with size 0, might reset the device\n");
3413 "Got DMA with size 0, might reset the device\n");
4032 * goya_debugfs_read32 - read a 32bit value from a given device or a host mapped
4036 * @addr: device or host mapped address
4088 * goya_debugfs_write32 - write a 32bit value to a given device or a host mapped
4092 * @addr: device or host mapped address
4923 /* Make sure configuration is flushed to device */
5262 return hdev->pdev->device;