Lines Matching defs:bits
2369 /* GPIO bits 0-9 used for analog switch:
2581 * properly (methinks) causing no keyup bits being set */
3003 * Note: Some bits are Audio_Mask !
3052 /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3166 * the eagles does not use the standard muxsel-bits but
3189 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3867 u8 bits;
3878 bits = micro[n];
3881 if (bits & 0x01)
3886 bits >>= 1;
4292 * The correct GPIO_OUT_EN value might have some more bits set. It should
4445 /* enable gpio bits, mask obtained via btSpy */
4470 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4471 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4730 * with these bits (on PXC200AF you need to set mux 2 here)
4759 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4760 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4772 * GPIO bits 0-9 are used for the analog switch: